Support us

QuizTraffic rulesDenmark

This interesting quiz helps you test your knowledge in a clear and visual way. With easy multiple-choice questions, you can quickly build confidence and learn new facts while keeping it simple, interactive, and fun.

Traffic signs
Traffic rules
Denmark
True/false 17 Denmark 33 Car controls 109 Dashboard lights 40 Priority rules 9 Pedestrians 19 Cyclists 20 Driving licence 40 Show all 640
Which vehicle type is mainly associated with driving licence AM?

301. Which vehicle type is mainly associated with driving licence AM?

Truck.
✓ Moped.
Motorcycle.
Bus.

Driving licence AM is mainly associated with mopeds. Category AM covers mopeds with a design speed above 25 km/h and up to 45 km/h.

Driving licence card for category AM
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do when driving through heavy rain?

302. What should you do when driving through heavy rain?

Use cruise control to maintain a constant speed.
Accelerate through the rain to clear it more quickly.
Use main beam to improve visibility.
✓ Reduce speed and increase your following distance.

Heavy rain reduces grip and visibility. Lower speed and extra distance give you more time to react safely.

Vehicle travelling through heavy rain
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if you approach slow-moving farm machinery?

303. What should you do if you approach slow-moving farm machinery?

Overtake as soon as the road becomes slightly wider.
Overtake even if the vehicle is signalling to turn.
✓ Keep a safe distance and overtake only when safe.
Drive close behind until there is room to pass.

Farm machinery may be wide, slow, or turn unexpectedly. Keep distance and only overtake when you have a clear view and enough space.

Vehicle approaching slow-moving farm machinery
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do when approaching an uncontrolled junction?

304. What should you do when approaching an uncontrolled junction?

Continue at normal speed unless another vehicle is visible.
Enter first if you reach the junction before another vehicle.
✓ Slow down, look carefully in all directions, and proceed only when safe.
Rely on the priority rule without reducing your speed.

At an uncontrolled junction, priority may not be obvious. Reduce speed, check carefully, and only enter when you are sure it is safe.

Vehicle approaching an uncontrolled junction
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Are bicycle lights required at night in Denmark?

305. Are bicycle lights required at night in Denmark?

No.
✓ Yes.

Cyclists in Denmark are generally required to use bicycle lights at night.

Bicycle lights used at night
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why are tyre condition and pressure especially important on a motorcycle?

306. Why are tyre condition and pressure especially important on a motorcycle?

They determine how brightly the lights work.
✓ They directly affect grip, stability, and braking.
They matter only when carrying a passenger.
They mainly affect the engine temperature.

A motorcycle relies on a relatively small area of tyre contact with the road. Correct tyre pressure, tread and condition are important for grip, steering, stability and braking. Check the tyres regularly and follow the manufacturer's recommended pressures.

Checking the condition of a motorcycle tyre
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does the resume function of cruise control normally do?

307. What does the resume function of cruise control normally do?

Switches cruise control off completely.
Applies the brakes automatically.
Sets the vehicle's current speed as a new limit.
✓ Returns the vehicle to the previously set cruising speed.

The resume function normally returns the vehicle to the previously set cruise-control speed after the system has been temporarily disengaged. The driver should use it only when traffic and road conditions are suitable.

RES button for resuming the stored cruising speed
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Should the legal alcohol limit be treated as a safe target?

308. Should the legal alcohol limit be treated as a safe target?

Yes, if you know exactly how much you have drunk.
✓ No, impairment can begin before the legal limit is reached.
Yes, if you feel completely sober.
Yes, because impairment begins only above the limit.

A legal limit is an enforcement threshold, not a recommended drinking level. Even a small amount of alcohol can affect driving performance.

Alcohol consumption and the limits of safe driving
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
How should a motorcyclist react to grooves or ruts in the road?

309. How should a motorcyclist react to grooves or ruts in the road?

Grip the handlebars as tightly as possible.
✓ Reduce speed and keep a relaxed, steady grip.
Brake hard while riding through them.
Accelerate sharply to cross them quickly.

Longitudinal grooves or ruts can affect a motorcycle's steering and may make the wheels follow the uneven surface. Reduce speed where necessary, keep a relaxed but steady grip and avoid sudden braking, acceleration or steering corrections.

Motorcyclist approaching grooves in the road surface
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Are headlights required during the day in Denmark?

310. Are headlights required during the day in Denmark?

✓ Yes.
No.

Drivers in Denmark are generally required to use daytime running lights or dipped headlights during the day.

Vehicle headlights used during daylight
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you normally do before changing gear in a manual vehicle?

311. What should you normally do before changing gear in a manual vehicle?

Apply the parking brake.
Press the accelerator pedal fully.
✓ Press the clutch pedal fully.
Switch off the engine.

Pressing the clutch pedal disconnects the engine from the transmission so that another gear can be selected. After changing gear, the clutch should be released smoothly.

Clutch operation when changing gear in a manual vehicle
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
How can a roof load affect vehicle handling?

312. How can a roof load affect vehicle handling?

It affects only fuel consumption, not handling.
It reduces the effect of strong crosswinds.
It lowers the vehicle's centre of gravity.
✓ It can raise the centre of gravity and reduce stability.

Weight carried high on the vehicle can increase body movement and make sudden steering or cornering less stable.

Vehicle carrying a raised roof load
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you avoid if your vehicle starts to skid?

313. What should you avoid if your vehicle starts to skid?

✓ Sudden braking, acceleration, or sharp steering.
Use smooth steering movements.
Allow the tyres time to regain grip.
Look where you want the vehicle to go.

Sudden braking, acceleration, or steering can make a skid worse. Stay calm and use smooth controls while the tyres regain grip.

Vehicle beginning to skid
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do before using a pedestrian crossing?

314. What should you do before using a pedestrian crossing?

Check only the lane nearest to you before crossing.
Cross as soon as the nearest vehicle starts slowing down.
Rely on the crossing markings to make every vehicle stop.
✓ Make sure it is safe to cross.

Even at a pedestrian crossing, make sure approaching drivers have seen you and are able to stop before you cross.

Pedestrian checking traffic before using a crossing
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does the ON position of a traditional ignition switch normally do?

315. What does the ON position of a traditional ignition switch normally do?

Locks the steering.
Switches off all electrical accessories.
Turns the starter motor.
✓ Switches on the vehicle's electrical systems without operating the starter.

The ON position normally switches on the vehicle's electrical and ignition systems without operating the starter motor. The engine is started by turning the key further to the START position.

ON position on a traditional ignition switch
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if fuel spills while you are refuelling?

316. What should you do if fuel spills while you are refuelling?

Ignore the spill if only a small amount escaped.
Continue filling the tank and clean it up afterwards.
Wash the spill away with water and continue refuelling.
✓ Stop refuelling, avoid ignition sources, and alert station staff.

If fuel is spilled, stop refuelling immediately and keep flames, sparks, and other ignition sources away. Do not start the vehicle until the situation is safe. Alert filling-station staff and follow their instructions for dealing with the spill.

Fuel spilled during refuelling
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
How should luggage or other cargo be carried in or on a vehicle?

317. How should luggage or other cargo be carried in or on a vehicle?

✓ Securely, within load limits, without blocking visibility or lights.
Loosely in the passenger area for short journeys.
Where it is easiest to reach while driving.
Loosely in the boot so it can move a little.

Unsecured or overloaded cargo can affect steering and braking, injure occupants during sudden stops, or fall into the road. It must not obstruct the driver's view or vehicle lights.

Luggage and cargo carried in a vehicle
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
You do not need to look for cyclists when opening your car door.

318. You do not need to look for cyclists when opening your car door.

True.
✓ False.

You should always check for cyclists, motorcyclists, and other road users before opening a door.

Cyclist near the door of a parked car
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if you see loose gravel on the road?

319. What should you do if you see loose gravel on the road?

Brake firmly before the tyres begin to slide.
✓ Slow down and avoid sudden steering or braking.
Maintain your speed and avoid using the brakes.
Steer around loose patches whenever possible.

Loose gravel reduces grip and can make the vehicle skid. Slow down and use smooth steering and braking.

Vehicle on a loose gravel road
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
How should you use the clutch and accelerator when moving off?

320. How should you use the clutch and accelerator when moving off?

Keep the clutch fully pressed while accelerating.
✓ Release the clutch smoothly while applying the accelerator progressively.
Press the brake and accelerator together.
Release the clutch suddenly without using the accelerator.

When moving off, release the clutch pedal smoothly through the biting point while applying the accelerator progressively. This helps the vehicle move away smoothly without stalling or excessive engine speed.

Coordinating the clutch and accelerator when moving off
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

321. What does this vehicle-control symbol indicate?

Rear window demister.
✓ Windscreen wiper speed.
Windscreen washer.
Air recirculation.

This symbol relates to the windscreen wipers. The control allows the driver to select an appropriate wiping mode or speed for the amount of rain and visibility conditions.

Windscreen-wiper control for adjusting wiping speed
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do before entering a roundabout?

322. What should you do before entering a roundabout?

Stop before every roundabout, even when it is clear.
Maintain your speed unless another vehicle blocks your path.
✓ Slow down and give way when required.
Enter first if you reach the roundabout before other traffic.

Before entering a roundabout, reduce your speed, observe traffic, and give way according to the local rules.

Vehicle approaching a roundabout
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does it mean to cover the brake pedal?

323. What does it mean to cover the brake pedal?

Rest your foot lightly on the brake while driving.
✓ Position your right foot over the brake, ready to press it.
Apply the parking brake slightly.
Press the brake and accelerator together.

To cover the brake, move your right foot over the brake pedal without pressing it, so you are ready to brake quickly if a hazard develops.

Right foot positioned over the brake pedal
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do with the parking brake before leaving a parked vehicle?

324. What should you do with the parking brake before leaving a parked vehicle?

Apply it only on a slope.
✓ Apply it securely.
Release it completely.
Leave it partly applied.

Before leaving a parked vehicle, apply the parking brake securely to help prevent unintended movement. Also select the appropriate gear or transmission position for parking.

Securing a parked vehicle with the parking brake
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What is important when raising a vehicle with its jack?

325. What is important when raising a vehicle with its jack?

Raise the vehicle before applying the parking brake.
Work underneath if the jack appears stable.
Place the jack on soft ground to prevent floor damage.
✓ Use the correct jacking point and never go underneath a vehicle on a jack.

A jack can slip or fail if it is incorrectly positioned. Secure the vehicle and use additional approved supports before working underneath it.

Vehicle raised at a jacking point for a wheel change
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do with the clutch when bringing a manual vehicle to a stop?

326. What should you do with the clutch when bringing a manual vehicle to a stop?

Pump it repeatedly while braking.
Press it before using the brake pedal.
✓ Press it before the engine begins to stall.
Keep it released until after the vehicle stops.

When stopping a manual vehicle, brake normally and press the clutch pedal before the engine speed becomes too low and the engine stalls. Avoid pressing the clutch unnecessarily early, as this reduces engine braking.

Clutch-pedal operation when stopping a manual vehicle
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What is the minimum licence for a D bus towing a trailer over 750 kg?

327. What is the minimum licence for a D bus towing a trailer over 750 kg?

Licence D.
✓ Licence DE.
Licence BE.
Licence CE.

Category D permits a trailer with a maximum authorised mass of up to 750 kg. A category D vehicle towing a trailer above 750 kg requires category DE.

Category D bus towing a trailer over 750 kg
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do when a bus signals to pull away from a bus stop?

328. What should you do when a bus signals to pull away from a bus stop?

Accelerate and pass before the bus moves out.
✓ Slow down and be prepared to let it move out when safe.
Sound your horn so the bus waits for you.
Drive closely beside the bus to prevent it moving out.

Buses may pull away after picking up passengers. Slow down, check the traffic situation, and allow space when it is safe.

Bus signalling to pull away from a stop
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
When should you fasten your seat belt?

329. When should you fasten your seat belt?

✓ Before the vehicle starts moving.
Only on long journeys.
Only when traffic is heavy.
After joining traffic.

Fasten your seat belt before the vehicle starts moving and keep it fastened throughout the journey. Make sure your passengers are also safely seated and properly restrained.

Fastening a seat belt before setting off
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Which vehicles are covered by driving licence AM?

330. Which vehicles are covered by driving licence AM?

Motorcycles up to 35 kW.
Cars up to 3,500 kg.
Any two-wheeled motor vehicle.
✓ Mopeds over 25 and up to 45 km/h, and light quadricycles.

Category AM covers certain two- and three-wheeled mopeds with a maximum design speed above 25 km/h and not exceeding 45 km/h, as well as light quadricycles.

Category AM mopeds and light quadricycles
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What is the main safety risk of aggressive driving?

331. What is the main safety risk of aggressive driving?

✓ It increases the risk of crashes.
It can make the journey less comfortable.
It may attract the attention of the police.
It can increase fuel consumption.

Aggressive driving, such as tailgating, speeding, or sudden lane changes, reduces safety margins and increases the risk of crashes and conflict with other road users.

Driver displaying aggressive behaviour in traffic
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do when a road worker directs traffic?

332. What should you do when a road worker directs traffic?

Obey only if traffic has completely stopped.
✓ Follow the worker's signals and instructions.
Follow the vehicle ahead instead of the worker's signal.
Follow the normal traffic signs instead.

Authorised road workers may control traffic through a work zone. Watch carefully and follow their directions.

Road worker directing traffic
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should cyclists avoid using a handheld phone?

333. Why should cyclists avoid using a handheld phone?

✓ It reduces your control and attention.
Because phones must be switched off while cycling.
Because phone signals can interfere with traffic lights.
Because phones can interfere with bicycle electronics.

Using a phone can distract you and may prevent you from steering, braking, or reacting properly.

Cyclist using a handheld phone
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Should rear-seat passengers be securely restrained?

334. Should rear-seat passengers be securely restrained?

✓ Yes, using seat belts or suitable child restraints as appropriate.
Only when travelling on motorways or at higher speeds.
Only if the vehicle does not have rear airbags.
No, only front-seat occupants need to be restrained.

Rear-seat passengers should be securely restrained using seat belts or suitable child restraints as appropriate. Proper restraint reduces the risk of serious injury and prevents occupants from being thrown around or forwards in a collision.

Rear-seat passengers secured for a journey
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does turning a traditional ignition switch to OFF normally do?

335. What does turning a traditional ignition switch to OFF normally do?

Operates the starter motor.
Selects accessory power.
Releases the parking brake.
✓ Switches off the engine and ignition systems.

Turning a traditional ignition switch to OFF switches off the engine and ignition systems. The key can then normally be moved to the LOCK position and removed.

OFF position on a traditional ignition switch
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
How should tyre pressure normally be checked?

336. How should tyre pressure normally be checked?

By looking at whether the tyres appear firm.
Using the maximum pressure shown on the tyre.
Only by a certified maintenance service.
✓ When the tyres are cold, using the manufacturer's recommended pressure.

Tyre pressure rises as tyres become warm. Check them when cold and use the pressure specified on the vehicle label or in the owner's manual.

Checking a vehicle's tyre pressure
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What is the general minimum legal tread depth for car tyres in Denmark?

337. What is the general minimum legal tread depth for car tyres in Denmark?

1.5 mm.
1.0 mm.
✓ 1.6 mm.
2.0 mm.

The general minimum legal tread depth for car tyres in Denmark is 1.6 mm. Higher minimums may apply to winter tyres, during winter periods or in winter conditions.

Measuring tread depth on a vehicle tyre
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What normally happens to cruise control when you press the brake pedal?

338. What normally happens to cruise control when you press the brake pedal?

The accelerator pedal locks in position.
✓ Cruise control is cancelled or temporarily disengaged.
The parking brake is applied.
The selected speed increases.

Pressing the brake pedal normally cancels or temporarily disengages cruise control, returning speed control to the driver.

Brake-pedal operation to disengage cruise control
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
How should cyclists brake on a wet road?

339. How should cyclists brake on a wet road?

Use only one brake to avoid skidding.
✓ Brake earlier and more gradually than usual.
Brake sharply once you are close to stopping.
Brake later and more firmly than usual.

Wet surfaces reduce grip and increase stopping distance. Smooth, early braking helps prevent skidding.

Cyclist braking on a wet road
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this dashboard symbol indicate?

340. What does this dashboard symbol indicate?

Air conditioning.
✓ Rear window demister.
Front windscreen demister.
Air recirculation.

This symbol indicates the rear window demister. It heats the rear window to help clear condensation, mist or frost and improve visibility.

Rear-window demister symbol on the dashboard
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this dashboard symbol indicate?

341. What does this dashboard symbol indicate?

Engine-temperature warning.
Low tyre pressure.
Windscreen demister active.
✓ Low windscreen washer fluid.

This symbol indicates that the windscreen washer fluid level is low. Refill the washer-fluid reservoir with suitable fluid when possible.

Low washer-fluid warning symbol on the dashboard
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Where should you change a wheel after a puncture?

342. Where should you change a wheel after a puncture?

On a slight slope if the parking brake is applied.
On soft ground if the jack appears stable.
✓ On firm, level ground well away from moving traffic.
Where the puncture occurred, as long as the hazard lights are on.

The vehicle must be stable and protected from traffic. Apply the parking brake and follow the manufacturer's wheel-changing instructions.

Wheel change on firm ground away from traffic
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you use headlights in poor visibility?

343. Why should you use headlights in poor visibility?

To reduce fuel consumption.
To prevent the tyres from slipping.
✓ To see better and be seen by others.
To keep the windscreen clear.

Headlights help you see the road and make your vehicle more visible to other road users in fog, rain, darkness, or poor weather.

Vehicle using headlights in reduced visibility
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you never leave a petrol or diesel engine running in an enclosed space?

344. Why should you never leave a petrol or diesel engine running in an enclosed space?

The engine can lose oil pressure.
The cooling system can stop working.
✓ Dangerous carbon monoxide can build up.
The battery can become overcharged.

Exhaust gases from petrol and diesel engines can contain carbon monoxide, a poisonous gas that can build up quickly in an enclosed or poorly ventilated space. Never leave the engine running inside a closed garage or similar area.

Running vehicle engine in an enclosed space
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should hard braking be avoided while a motorcycle is leaning in a bend?

345. Why should hard braking be avoided while a motorcycle is leaning in a bend?

It makes the motorcycle turn more sharply.
It increases tyre pressure immediately.
✓ It can reduce stability and available tyre grip.
It can make the engine overheat.

When a motorcycle is leaning, the tyres are already using grip to turn. Hard braking can demand additional grip and may reduce stability. Whenever possible, adjust speed before the bend and use smooth, controlled inputs while cornering.

Motorcycle leaning while travelling through a bend
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do after fitting a temporary spare wheel?

346. What should you do after fitting a temporary spare wheel?

Use it as a permanent replacement if it looks undamaged.
✓ Follow its speed and distance restrictions and replace it as soon as possible.
Increase its pressure to match the other tyres.
Drive normally if the vehicle feels stable.

Temporary spare wheels may have limited speed, distance, and handling capabilities. Arrange a proper repair or replacement promptly.

Temporary spare wheel fitted to a vehicle
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why must you take wider turns when towing a trailer?

347. Why must you take wider turns when towing a trailer?

Wider turns reduce the trailer's stopping distance.
Wider turns decrease tyre wear.
Wide turns prevent the trailer from swaying.
✓ The trailer follows a tighter path than the towing vehicle.

Trailer wheels cut closer to the inside of a turn. Allow enough clearance from kerbs, signs, pedestrians, and other vehicles.

Towing vehicle and trailer negotiating a turn
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

348. What does this vehicle-control symbol indicate?

Seat ventilation.
✓ Seat heating.
Heated steering wheel.
Air conditioning.

This control activates the seat heating, which warms the seat cushion and, on many vehicles, the backrest. Several heat levels may be available.

Heated-seat control and symbol
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you take extra care if oil or diesel is spilled on the road?

349. Why should you take extra care if oil or diesel is spilled on the road?

✓ It can make the road extremely slippery.
It can make the brakes overheat.
It can damage road markings immediately.
It can make the road surface much softer.

Oil, diesel and other fluids can create a very slippery road surface, particularly for motorcycles and bicycles. Reduce speed, avoid sudden braking or steering and keep the vehicle as stable as possible when crossing a contaminated area.

Oil or diesel spilled on a road surface
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
How can strong crosswinds affect a vehicle towing a trailer?

350. How can strong crosswinds affect a vehicle towing a trailer?

✓ They can push the trailer sideways and reduce stability.
They make the trailer more stable at higher speeds.
They matter only when the trailer is empty.
They affect only the towing vehicle, not the trailer.

Trailers have large side surfaces and may be affected strongly by wind, especially on bridges and exposed roads.

Vehicle and trailer exposed to crosswinds
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA