Support us

QuizTraffic rulesFinland

Test your knowledge with our multiple-choice quiz. Learn from each answer and improve your understanding of the traffic rules and road signs of Finland.

For informational purposes only. Always follow official regulations. Some content and images were created with AI assistance.

Traffic signs
Traffic rules
Finland
True/false 17 Finland 32 Car controls 109 Dashboard lights 40 Priority rules 9 Pedestrians 19 Cyclists 20 Driving licence 40 Show all 639
What should you do before joining a motorway?

551. What should you do before joining a motorway?

Check your mirrors only and assume the blind spot is clear.
Wait until the end of the slip road before checking for a gap.
✓ Check your mirrors and blind spot, signal, and look for a safe gap.
Move onto the motorway as soon as the lane markings allow.

Observe motorway traffic early, signal clearly, and merge only when there is a safe gap.

Driver checking motorway traffic before merging
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you avoid braking hard on a curve?

552. Why should you avoid braking hard on a curve?

It can make the steering feel heavier.
It can increase tyre pressure during the turn.
✓ It can reduce control and increase the risk of skidding.
It can make the tyres grip the road more strongly.

Hard braking on a curve can upset the vehicle's balance and reduce grip. Slow down before the curve and steer smoothly.

Vehicle braking while negotiating a bend
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if an overtaking vehicle is coming toward you?

553. What should you do if an overtaking vehicle is coming toward you?

Move closer to the centre so the other driver notices you.
Accelerate to pass the danger point more quickly.
Brake sharply as soon as the vehicle enters your lane.
✓ Slow down and move slightly aside if safe.

If an oncoming vehicle creates danger while overtaking, reduce speed and make space if it is safe to do so. Avoid sudden movements that could create an additional hazard.

Oncoming vehicle overtaking into the driver's lane
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if the service brakes fail while driving?

554. What should you do if the service brakes fail while driving?

Switch off the engine immediately while moving.
Continue slowly until the brakes begin working again.
✓ Reduce speed using other available braking methods and stop safely.
Shift into neutral and let the vehicle coast to a stop.

Remain calm, warn other road users, and use other available braking methods to reduce speed. This may include engine braking or a lower gear, and careful use of the parking or emergency brake according to the vehicle's design. Steer toward the safest available stopping area.

Vehicle braking-system failure while driving
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do with the clutch during emergency braking in a manual vehicle?

555. What should you do with the clutch during emergency braking in a manual vehicle?

Keep it partly pressed.
Release it suddenly.
Pump it repeatedly.
✓ Press it fully while maintaining firm brake pressure.

During emergency braking in a manual vehicle, maintain firm pressure on the brake and press the clutch pedal fully so the engine does not stall as the vehicle slows. Do not reduce braking pressure while operating the clutch.

Brake and clutch operation during an emergency stop
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if medicine makes you feel drowsy?

556. What should you do if medicine makes you feel drowsy?

✓ Do not drive until the effect has passed.
Drink coffee before driving.
Drive only for short distances.
Drive slowly and avoid motorways.

If a medicine causes drowsiness, your concentration, judgement, and reaction time may be reduced. Do not drive until you are fit to do so and the effect has passed.

Drowsiness after taking medicine
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
How can a heavy load affect stopping distance?

557. How can a heavy load affect stopping distance?

It affects stopping distance only on steep roads.
It always shortens the stopping distance.
✓ It can increase the distance needed to stop.
It reduces the driver's reaction time.

A heavily loaded vehicle has more mass and may require additional distance to slow down or stop safely.

Loaded vehicle and the space needed for braking
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
You may park anywhere as long as you leave your hazard lights on.

558. You may park anywhere as long as you leave your hazard lights on.

✓ False.
True.

Hazard lights are used to warn other road users of a hazard or an unexpectedly stopped vehicle. They do not make illegal or unsafe parking acceptable.

Parked vehicle with hazard warning lights flashing
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you check your mirrors before braking?

559. Why should you check your mirrors before braking?

To decide which gear to use while slowing down.
To check whether your brake lights are working.
To check whether the road surface is slippery.
✓ To know what is happening behind you.

Checking your mirrors helps you understand what is happening behind you and anticipate how following traffic may react. In an emergency, do not delay necessary braking.

Driver checking following traffic before braking
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you take care when parking a motorcycle on soft ground?

560. Why should you take care when parking a motorcycle on soft ground?

The brakes may lock while the motorcycle is parked.
The engine may become difficult to start.
The chain may become too tight.
✓ The stand may sink into the ground and the motorcycle could fall.

On soft or unstable ground, the side or centre stand can sink or move, causing the motorcycle to fall. Park on a firm, stable surface or use a suitable support under the stand when necessary.

Motorcycle stand resting on soft ground
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if a vehicle is reversing near you?

561. What should you do if a vehicle is reversing near you?

Walk behind it if it is reversing slowly.
✓ Stay clear and make sure the driver can see you.
Rely on the reversing sensors to make it stop.
Cross behind it once the driver looks forward.

Reversing vehicles have blind spots. Stay away from the vehicle and make sure the driver can see you.

Pedestrian near a reversing vehicle
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why can main-beam headlights make driving in fog more difficult?

562. Why can main-beam headlights make driving in fog more difficult?

✓ The light can reflect off fog droplets and reduce visibility.
The brighter light makes the windscreen mist more quickly.
Main beam makes interior lights less effective.
Main beam reduces the effectiveness of the fog lights.

Main beam can reflect back from fog and create glare, making it harder to see the road ahead.

Headlight glare reflected by fog
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do about a chip in the windscreen?

563. What should you do about a chip in the windscreen?

Clean the glass and continue driving normally.
Wait until the chip becomes a larger crack.
✓ Have it assessed and repaired promptly.
Ignore it if it is outside your direct view.

A chip can obstruct your view, weaken the glass, and develop into a larger crack. Have it checked and repaired promptly.

Stone chip in a vehicle's windscreen
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you take extra care when crossing a tram or bus lane?

564. Why should you take extra care when crossing a tram or bus lane?

Cars always have priority over trams and buses.
Trams and buses must always stop before crossings.
You only need to check for traffic from one direction.
✓ A tram or bus may approach quickly.

Check carefully before crossing or entering a tram or bus lane. Trams cannot steer around obstacles, and both trams and buses may need significant distance to stop.

Traffic crossing a lane used by public transport
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
How should you normally brake on a motorcycle?

565. How should you normally brake on a motorcycle?

✓ Use both brakes smoothly and progressively.
Alternate between the front and rear brakes.
Use only the rear brake.
Use only the front brake.

During normal braking, use both the front and rear brakes smoothly and progressively. The front brake normally provides much of the braking force, while the rear brake also helps slow and stabilise the motorcycle. Sudden or poorly balanced braking can reduce stability or cause a wheel to lose grip.

Motorcyclist using the front and rear brakes
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Which vehicle type is mainly associated with driving licence D?

566. Which vehicle type is mainly associated with driving licence D?

Car.
Motorcycle.
Moped.
✓ Bus.

Driving licence D is mainly associated with buses. Category D1 covers smaller buses, D covers larger buses, and D1E and DE allow heavier trailers.

Driving licence card for category D
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do before turning across a cycle lane?

567. What should you do before turning across a cycle lane?

Ignore the cycle lane if you are signalling.
✓ Check mirrors and blind spots carefully for cyclists.
Sound your horn and turn immediately.
Turn quickly before cyclists reach the junction.

Cyclists may be beside or behind you when you turn. Check mirrors and blind spots, signal clearly, and turn only when it is safe.

Vehicle preparing to turn across a cycle lane
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if the pedestrian light is red?

568. What should you do if the pedestrian light is red?

Cross if nearby vehicles appear to have stopped.
Start crossing if the signal is about to change.
✓ Wait until it turns green.
Cross if there is a large enough gap in traffic.

A red pedestrian signal means you should wait before crossing.

Red pedestrian signal at a crossing
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you expect when leaving a sheltered area during strong winds?

569. What should you expect when leaving a sheltered area during strong winds?

Your steering may become lighter.
The vehicle may automatically slow down.
✓ A sudden gust may affect your vehicle.
The road surface may suddenly become more slippery.

Buildings, trees, and other obstacles can block wind. When you leave shelter, a sudden gust may push your vehicle.

Vehicle leaving a sheltered stretch of road
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
You must stop at a red traffic light.

570. You must stop at a red traffic light.

False.
✓ True.

A red traffic light means you must stop and wait until it is allowed to proceed.

Vehicle stopped at a red traffic light
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why is it important to make yourself visible at night?

571. Why is it important to make yourself visible at night?

To make it safe to walk closer to moving traffic.
To avoid checking for approaching vehicles.
To ensure drivers can always stop in time.
✓ To make drivers see you more easily.

Bright or reflective clothing helps drivers notice pedestrians in low-light conditions.

Pedestrian visibility beside a road at night
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if you see smoke or fire inside a tunnel?

572. What should you do if you see smoke or fire inside a tunnel?

Stay inside the vehicle and wait for the smoke to clear.
✓ Follow tunnel instructions and leave the tunnel if it is safe to do so.
Stop near the fire so you can assess the situation.
Keep driving normally unless the tunnel is completely blocked.

If it is safe to drive out of the tunnel, do so. If you cannot continue safely, stop, switch off the engine, leave the vehicle, and use the marked emergency exits or refuge routes. Follow tunnel-control instructions.

Smoke inside a road tunnel
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you leave space when cycling beside parked cars?

573. Why should you leave space when cycling beside parked cars?

Because parked vehicles have priority over cyclists.
✓ A door may open suddenly.
To make it easier for traffic to overtake you.
Because the road could be slippery beside parked cars.

A driver or passenger may open a door without seeing you. Leaving space reduces the risk of a dooring collision.

Cyclist riding beside parked cars
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Where should you change a wheel after a puncture?

574. Where should you change a wheel after a puncture?

On a slight slope if the parking brake is applied.
✓ On firm, level ground well away from moving traffic.
Where the puncture occurred, as long as the hazard lights are on.
On soft ground if the jack appears stable.

The vehicle must be stable and protected from traffic. Apply the parking brake and follow the manufacturer's wheel-changing instructions.

Wheel change on firm ground away from traffic
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why can bridges be dangerous in strong winds?

575. Why can bridges be dangerous in strong winds?

Vehicles require more engine power on bridges.
✓ They are often exposed to stronger gusts.
Bridge lighting makes it harder to judge speed.
Steering works less effectively above water.

Bridges are often open and exposed, allowing strong winds to affect vehicles more suddenly.

Exposed bridge in strong wind
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this dashboard symbol indicate?

576. What does this dashboard symbol indicate?

Electronic stability control.
Low tyre pressure.
✓ Four-wheel-drive system.
Differential lock.

This symbol relates to the vehicle's four-wheel-drive system, which can transmit power to all four wheels. The exact symbol and operating modes vary between vehicles.

Four-wheel-drive system symbol on the dashboard
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should headlights, indicators, and other exterior lights be kept clean and working?

577. Why should headlights, indicators, and other exterior lights be kept clean and working?

They only need to work when you drive at night.
They make the vehicle use less fuel.
They prevent the windscreen from misting.
✓ They help you see, be seen, and communicate your intentions.

Dirty or faulty lights reduce visibility and make it harder for other road users to understand when you are braking, turning, reversing, or changing position.

Checking and cleaning a vehicle's exterior lights
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Which vehicles are especially vulnerable to strong crosswinds?

578. Which vehicles are especially vulnerable to strong crosswinds?

Low, heavily loaded vehicles.
Electric vehicles.
✓ High-sided vehicles such as trucks, buses, and vans.
Vehicles with full fuel tanks.

High-sided vehicles can be pushed sideways because of their large side area. Cyclists and motorcyclists can also be strongly affected by sudden gusts.

High-sided vehicle exposed to crosswinds
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you keep your windscreen clean?

579. Why should you keep your windscreen clean?

To prevent windscreen damage.
To make the headlights brighter.
✓ To see the road clearly.
To reduce fuel consumption.

A clean windscreen gives you a clear view of the road, signs, pedestrians, cyclists, and other vehicles.

Cleaning a windscreen to improve the driver's view
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you not ignore temporary speed limits?

580. Why should you not ignore temporary speed limits?

They are recommendations rather than limits.
✓ They are used to protect people and manage hazards.
They apply only to road workers.
They apply only when traffic is congested.

Temporary speed limits may be used near roadworks, accidents, events, or dangerous conditions. They help keep traffic safe.

Temporary speed-limit sign at roadworks
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

581. What does this vehicle-control symbol indicate?

Air recirculation.
Air conditioning.
✓ Cabin fan speed.
Seat heating.

This control adjusts the cabin ventilation fan speed. Increasing the setting moves more air through the vehicle's ventilation and climate-control system.

Control for adjusting the cabin fan speed
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this dashboard symbol indicate?

582. What does this dashboard symbol indicate?

Door-open warning.
Engine-management warning.
✓ Immobiliser or anti-theft system.
Power-steering warning.

This symbol relates to the vehicle's immobiliser or anti-theft system. If it remains illuminated or flashes unexpectedly, the vehicle may not recognise the key or there may be a fault in the security system.

Immobiliser indicator symbol on the dashboard
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
You should stay focused on the road and avoid unnecessary distractions.

583. You should stay focused on the road and avoid unnecessary distractions.

✓ True.
False.

Distractions reduce awareness and reaction time, making driving more dangerous.

Driver keeping attention on the road ahead
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
When are winter tyres required in Finland?

584. When are winter tyres required in Finland?

They are not generally required.
During the entire year.
✓ During a defined winter period when winter conditions are present.
Only on motorways.

Winter tyres are required in Finland during a defined winter period when winter conditions are present.

Winter tyres for cold-weather driving
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should cyclists avoid using a handheld phone?

585. Why should cyclists avoid using a handheld phone?

Because phones can interfere with bicycle electronics.
Because phone signals can interfere with traffic lights.
✓ It reduces your control and attention.
Because a phone may be used only at low speeds.

Using a phone can distract you and may prevent you from steering, braking, or reacting properly.

Cyclist using a handheld phone
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do with the clutch when bringing a manual vehicle to a stop?

586. What should you do with the clutch when bringing a manual vehicle to a stop?

✓ Press it before the engine begins to stall.
Keep it released until after the vehicle stops.
Press it before using the brake pedal.
Pump it repeatedly while braking.

When stopping a manual vehicle, brake normally and press the clutch pedal before the engine speed becomes too low and the engine stalls. Avoid pressing the clutch unnecessarily early, as this reduces engine braking.

Clutch-pedal operation when stopping a manual vehicle
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

587. What does this vehicle-control symbol indicate?

✓ Fuel-filler flap release.
Boot release.
Bonnet release.
Central door locking.

This control releases the fuel-filler flap, allowing access to the vehicle's fuel filler.

Release control for the fuel-filler flap
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you use a lower gear when driving downhill?

588. Why should you use a lower gear when driving downhill?

✓ It helps control speed using engine braking.
It reduces engine braking to save fuel.
It makes the steering lighter on descents.
It allows the vehicle to coast more freely.

Engine braking helps prevent the vehicle from gaining too much speed and reduces strain on the brakes.

Lower-gear selection for a downhill road
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you reduce speed in residential areas?

589. Why should you reduce speed in residential areas?

Because residential roads are usually more slippery.
✓ Pedestrians, cyclists, and children may be nearby.
Traffic from side roads must always give way.
Overtaking is prohibited throughout residential areas.

Residential areas often have pedestrians, cyclists, parked vehicles, driveways, and children, and hazards may appear suddenly. Lower speed gives you more time to react and stop safely.

Vehicle travelling through a residential street
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Should the side stand be fully raised before riding a motorcycle?

590. Should the side stand be fully raised before riding a motorcycle?

✓ Yes, a lowered stand could catch the road and affect control.
Yes, but only when carrying a passenger.
No, the stand helps stabilise the motorcycle while moving.
No, it can remain down when riding slowly.

The side stand should be fully raised before riding. If it remains down, it may strike the road surface, particularly when turning, and could cause the rider to lose control.

Motorcycle side stand and pre-ride checks
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do before overtaking another vehicle?

591. What should you do before overtaking another vehicle?

Drive close behind before starting the overtake.
✓ Make sure it is safe and allowed.
Signal and expect other traffic to make room.
Move out first and check whether the road is clear.

Before overtaking, check the road, mirrors, blind spots, signs, and markings, use your indicator, and only overtake when it is safe and permitted.

Vehicle preparing to overtake another vehicle
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do before a long journey to reduce the risk of driver fatigue?

592. What should you do before a long journey to reduce the risk of driver fatigue?

✓ Get enough sleep before starting the journey.
Keep the cabin as warm as possible.
Drink several energy drinks before leaving.
Plan to drive through the night.

Getting enough sleep before a long journey helps reduce the risk of driver fatigue. Plan breaks in advance and avoid starting a long drive when you are already tired.

Rest and preparation before a long drive
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this dashboard symbol indicate?

593. What does this dashboard symbol indicate?

✓ Sidelights.
Front fog lights.
Dipped headlights.
Main beam.

This symbol indicates that the sidelights, also known as position or parking lights, are switched on. They help make the vehicle visible to other road users but provide little illumination of the road ahead.

Sidelight indicator symbol on the dashboard
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you check after fitting a child restraint?

594. What should you check after fitting a child restraint?

That the child can easily loosen the harness.
✓ That it is securely installed and correctly fitted.
That the restraint is tilted as far back as possible.
That the seat belt is routed in any convenient way.

A child restraint should be installed securely and used according to the manufacturer's instructions. Check that the seat is firmly attached, the belt or ISOFIX connection is correct, and the child is restrained properly before driving.

Checking the installation of a child car seat
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do before entering a roundabout?

595. What should you do before entering a roundabout?

✓ Slow down and give way when required.
Maintain your speed unless another vehicle blocks your path.
Enter first if you reach the roundabout before other traffic.
Stop before every roundabout, even when it is clear.

Before entering a roundabout, reduce your speed, observe traffic, and give way according to the local rules.

Vehicle approaching a roundabout
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Which side do people drive on in Finland?

596. Which side do people drive on in Finland?

✓ Right-hand side.
Left-hand side.

Traffic drives on the right-hand side of the road in Finland.

Road traffic and the designated driving side
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if the vehicle consistently pulls to one side?

597. What should you do if the vehicle consistently pulls to one side?

Increase speed to see if the vehicle straightens.
✓ Check the tyre pressures and have the steering, alignment, and brakes inspected.
Ignore it if the tyres appear normal.
Keep driving and correct the steering as needed.

Persistent pulling can be caused by incorrect tyre pressure, wheel misalignment, suspension wear, or a braking fault. It should not be ignored.

Vehicle pulling to one side while travelling
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What is the minimum age for a standard car driving licence in Finland?

598. What is the minimum age for a standard car driving licence in Finland?

17 years.
19 years.
21 years.
✓ 18 years.

The minimum age for a standard car driving licence in Finland is 18 years.

Minimum age for obtaining a car driving licence
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
How can you check that a manual gearbox is in neutral?

599. How can you check that a manual gearbox is in neutral?

Pull up the parking brake.
Turn the steering wheel.
✓ Move the gear lever gently from side to side.
Press the accelerator pedal.

When a manual gearbox is in neutral, the gear lever can normally be moved freely from side to side across the centre of the gear pattern. Check that neutral is selected before starting the engine when appropriate.

Checking neutral with a manual gear lever
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What is black ice?

600. What is black ice?

Ice that forms only during darkness.
Frozen mud covering the road surface.
Snow mixed with road dirt.
✓ A thin, often transparent layer of ice that can be difficult to see.

Black ice is difficult to detect because the road surface may look merely wet. It can cause a sudden and severe loss of grip.

Thin ice covering a road surface
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA