QuizTraffic rulesItaly

Test your knowledge with our multiple-choice quiz. Learn from each answer and improve your understanding of the traffic rules and road signs of Italy.

For informational purposes only. Always follow official regulations. Some content and images were created with AI assistance.


What should you do if you notice an unfamiliar fluid underneath your vehicle?

501. What should you do if you notice an unfamiliar fluid underneath your vehicle?

✓ Do not ignore it. Identify the fluid and arrange an inspection if necessary.
Top up the fluid levels and continue driving.
Wait until the vehicle develops another problem.
Ignore it if no warning light is showing.

Clear water from air conditioning can be normal, but oil, coolant, fuel, transmission fluid, or brake fluid may indicate a fault requiring urgent attention.

Fluid leaking underneath a parked vehicle
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you leave extra space when passing road workers?

502. Why should you leave extra space when passing road workers?

✓ They may be working close to moving traffic.
Road workers always have priority over passing traffic.
To keep construction dust away from your vehicle.
To avoid damaging temporary road markings.

Workers may be only a short distance from passing vehicles. Reduce speed and leave as much safe space as possible.

Vehicle passing workers close to the road
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
How does higher speed affect a vehicle's stopping distance?

503. How does higher speed affect a vehicle's stopping distance?

It has no effect if the brakes are in good condition.
It affects reaction distance but not braking distance.
It affects braking distance only on wet roads.
✓ It increases the distance needed to stop.

As speed increases, the vehicle travels farther while the driver reacts and requires more distance to brake. This means the total stopping distance increases significantly as speed rises.

Vehicle speed and the distance needed to stop
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if you are unsure who has priority at a junction?

504. What should you do if you are unsure who has priority at a junction?

Enter slowly so the other driver has time to react.
Proceed if the other driver appears to be slowing down.
✓ Slow down and proceed only when it is safe.
Check only the direction that normally has priority.

If priority is unclear, reduce speed, observe carefully, and avoid entering the junction until you are sure it is safe.

Vehicles approaching a junction with uncertain priority
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you check before starting a motorcycle journey?

505. What should you check before starting a motorcycle journey?

Nothing if the motorcycle was recently serviced.
Only the fuel level and mirrors.
✓ Tyres, brakes, lights, steering, and controls.
Only the brakes and lights.

Before riding, carry out a basic safety check. Check the tyres, brakes, lights, steering and controls, and inspect the drive chain, belt or other drive components where applicable. Finding a problem before setting off can prevent a breakdown or loss of control.

Checking a motorcycle before a journey
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if your windscreen becomes covered with mud or spray?

506. What should you do if your windscreen becomes covered with mud or spray?

Switch off the wipers until the windscreen dries.
Use the demister instead of the washers.
Increase speed so the airflow clears the windscreen.
✓ Slow down and use the washers and wipers to restore clear vision.

Clear visibility is essential. Slow down safely and use your washers and wipers until you can see the road clearly again.

Mud and spray obscuring a vehicle's windscreen
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do when following a cyclist on a narrow road?

507. What should you do when following a cyclist on a narrow road?

Overtake as soon as your vehicle can fit past.
Sound your horn so the cyclist moves aside.
✓ Keep a safe distance and overtake only when there is enough space.
Drive close behind until there is room to pass.

Cyclists may need to avoid potholes, drains, or wind gusts. Keep distance and only pass when you can leave plenty of space.

Vehicle following a cyclist on a narrow road
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Where should passengers wait after safely leaving a broken-down vehicle?

508. Where should passengers wait after safely leaving a broken-down vehicle?

Wait close beside the vehicle where drivers can see you.
✓ In a protected place well away from moving traffic.
Wait in the traffic lane until help arrives.
Stand between the vehicle and the safety barrier.

Move passengers, children, and pets away from the carriageway. On high-speed roads, wait behind a safety barrier where possible.

Passengers moving away from a broken-down vehicle
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
How should a disabled vehicle be towed?

509. How should a disabled vehicle be towed?

With nobody controlling the disabled vehicle.
At the highest possible safe speed.
✓ Use approved towing points and a method permitted by local rules.
By attaching a rope to the bumper.

Incorrect towing can damage the vehicle or cause loss of control. Follow the manufacturer's instructions and local rules, and use professional recovery when the correct procedure is uncertain.

Disabled vehicle being towed
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Which EU driving licence category is used for tractors?

510. Which EU driving licence category is used for tractors?

✓ There is no single harmonised EU category.
Licence B.
Licence C.
Licence D.

There is no single harmonised EU driving licence category for agricultural or forestry tractors. The required licence depends on national rules. For example, Belgium uses category G, the Netherlands category T, and Germany categories L and T.

Tractor and agricultural driving licence categories
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should cyclists do when riding over loose gravel or road debris?

511. What should cyclists do when riding over loose gravel or road debris?

✓ Reduce speed and steer smoothly.
Make quick steering movements to avoid loose stones.
Keep the same speed as on a dry, smooth road.
Brake hard while turning.

Loose material reduces tyre grip. Smooth steering and controlled speed lower the chance of losing balance.

Cyclist riding over loose gravel
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What is the safest choice if you have consumed alcohol?

512. What is the safest choice if you have consumed alcohol?

Drink coffee before driving.
Eat something and wait a short while.
✓ Do not drive and arrange a sober form of transport.
Drive slowly and avoid busy roads.

Alcohol can impair judgement, coordination, vision, and reaction time. A sober driver, taxi, public transport, or an overnight stay is the safer choice.

Alcohol consumption and the decision not to drive
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
How should cyclists brake on a wet road?

513. How should cyclists brake on a wet road?

Brake sharply once you are close to stopping.
Use only one brake to avoid skidding.
Brake normally because wet roads do not affect grip.
✓ Brake earlier and more gradually than usual.

Wet surfaces reduce grip and increase stopping distance. Smooth, early braking helps prevent skidding.

Cyclist braking on a wet road
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Speed limits only apply when there is heavy traffic.

514. Speed limits only apply when there is heavy traffic.

True.
✓ False.

Speed limits apply at all times unless a different limit is clearly indicated.

Speed-limit sign beside a road
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should cyclists do before turning or changing position on the road?

515. What should cyclists do before turning or changing position on the road?

Signal only when a vehicle is close behind.
Look behind only after starting the turn.
Move first, then signal to traffic behind.
✓ Look behind, signal clearly, and move only when safe.

Checking behind and signalling gives other road users time to understand what you intend to do.

Cyclist preparing to turn or change road position
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if a motorcycle's drive chain is too loose?

516. What should you do if a motorcycle's drive chain is too loose?

✓ Adjust it correctly or have it checked before riding.
Tighten it as much as possible.
Lubricate it and ignore the loose tension.
Keep riding if the motorcycle still moves normally.

A loose drive chain can affect power transmission, damage components, or come off the sprockets. The chain should have the correct tension and lubrication specified by the motorcycle manufacturer. A chain that is too tight can also cause damage.

Loose drive chain on a motorcycle
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do with the parking brake when parking on a slope?

517. What should you do with the parking brake when parking on a slope?

Use it only if the engine is running.
✓ Apply it firmly.
Release it completely.
Leave it partly applied.

When parking on a slope, apply the parking brake firmly to help prevent the vehicle from rolling. Selecting an appropriate gear or Park provides additional security.

Using the parking brake when parking on a slope
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Where should you normally wait after a breakdown on a high-speed road?

518. Where should you normally wait after a breakdown on a high-speed road?

✓ Behind a safety barrier and well away from the vehicle and traffic.
Between the vehicle and the safety barrier.
In front of the vehicle while facing approaching traffic.
On the verge beside the broken-down vehicle.

A stationary vehicle can be struck by passing traffic. Waiting behind a barrier provides better protection.

People waiting behind a safety barrier after a breakdown
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What may happen to the steering when the ignition key is removed?

519. What may happen to the steering when the ignition key is removed?

The power steering remains fully active.
The wheels automatically straighten.
The steering becomes lighter.
✓ The steering lock may engage.

On vehicles fitted with a steering lock, removing the ignition key may allow the steering lock to engage. Never remove the key while the vehicle is moving.

Ignition key and vehicle steering lock
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this dashboard symbol indicate?

520. What does this dashboard symbol indicate?

Power-steering warning.
Electronic stability control.
Engine-management warning.
✓ Low tyre pressure.

This symbol indicates that one or more tyres may have low pressure. Check the tyre pressures and inspect the tyres for damage or a puncture.

Tyre-pressure warning symbol on the dashboard
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What is the minimum licence for a motorcycle with more than 35 kW?

521. What is the minimum licence for a motorcycle with more than 35 kW?

Licence AM.
Licence B.
Licence A1.
✓ Licence A.

Category A2 is limited to motorcycles with power not exceeding 35 kW. A motorcycle with more than 35 kW therefore requires category A.

Motorcycle with more than 35 kW
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What is the purpose of cruise control?

522. What is the purpose of cruise control?

To steer the vehicle automatically.
✓ To maintain a selected speed without continuous accelerator use.
To prevent the vehicle from exceeding any speed limit.
To keep a fixed distance from the vehicle ahead.

Cruise control can maintain a selected speed without the driver continuously pressing the accelerator. The driver must remain attentive and ready to brake or take control when necessary.

Vehicle cruise-control buttons and symbol
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Which vehicle combination is covered by driving licence BE?

523. Which vehicle combination is covered by driving licence BE?

✓ A category B vehicle with a trailer up to 3,500 kg.
A category C vehicle with a heavy trailer.
A bus with a trailer over 750 kg.
A category B vehicle with any trailer.

Category BE covers combinations consisting of a category B towing vehicle and a trailer or semi-trailer with a maximum authorised mass of no more than 3,500 kg. Lighter combinations may already be covered by category B.

Car and trailer covered by category BE
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What information is needed when requesting emergency assistance?

524. What information is needed when requesting emergency assistance?

✓ Your exact location, direction of travel, vehicle details, and the problem.
Your vehicle colour and approximate location.
Your name, destination, and planned route.
Your insurance details and last service date.

Road numbers, junctions, location markers, direction of travel, and a clear description of the incident help assistance reach you quickly.

Requesting help after a vehicle breakdown
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What is the safest way to cross the road with a child?

525. What is the safest way to cross the road with a child?

Let them run once the first lane is clear.
Ask them to decide when it is safe to cross.
Cross separately so everyone has more space.
✓ Hold their hand and keep them close.

Children can be unpredictable near traffic. Keep them close and guide them safely across the road.

Adult holding a child's hand while crossing the road
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
How can worn tyres affect driving in heavy rain?

526. How can worn tyres affect driving in heavy rain?

They clear water from the road more effectively.
They make steering more responsive in heavy rain.
✓ They increase the risk of aquaplaning.
They reduce the chance of skidding at low speeds.

Tyre tread helps channel water away and maintain grip. Worn tyres cannot clear water as effectively, increasing stopping distance and the risk of aquaplaning.

Worn tyre tread and wet-road grip
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you avoid resting your foot on the clutch pedal while driving?

527. Why should you avoid resting your foot on the clutch pedal while driving?

✓ It can cause unnecessary clutch wear.
It can increase tyre pressure.
It can lock the steering.
It can apply the parking brake.

Resting your foot on the clutch pedal can apply slight pressure to the clutch mechanism and cause unnecessary wear. Keep your left foot off the clutch when it is not needed.

Foot position near the clutch pedal
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if your vehicle begins rolling backward on a steep incline?

528. What should you do if your vehicle begins rolling backward on a steep incline?

Let it roll backwards and try again.
Switch off the engine and restart immediately.
Open the door and step out.
✓ Apply the brake, secure the vehicle, and restart carefully.

Stop the vehicle under control, apply the parking brake if necessary, and prepare to move away again safely.

Vehicle rolling backwards on a steep incline
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

529. What does this vehicle-control symbol indicate?

Electronic stability control.
Four-wheel drive.
Parking assistance.
✓ Driving mode selection.

This control selects a driving mode. Depending on the vehicle, different modes can alter characteristics such as accelerator response, steering assistance, transmission behaviour or energy use.

Selector for the vehicle's driving modes
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you normally do with the gearbox during a longer stop in a manual vehicle?

530. What should you normally do with the gearbox during a longer stop in a manual vehicle?

Select reverse gear.
✓ Select neutral and release the clutch.
Keep the accelerator pressed.
Keep first gear selected with the clutch pressed.

During a longer stop, selecting neutral and releasing the clutch can reduce unnecessary strain on the clutch release mechanism. Keep the vehicle securely held with the brake or parking brake as appropriate.

Neutral gear selection during a longer stop
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why are tyre condition and pressure especially important on a motorcycle?

531. Why are tyre condition and pressure especially important on a motorcycle?

✓ They directly affect grip, stability, and braking.
They affect only comfort at high speed.
They matter only when carrying a passenger.
They mainly affect the engine temperature.

A motorcycle relies on a relatively small area of tyre contact with the road. Correct tyre pressure, tread and condition are important for grip, steering, stability and braking. Check the tyres regularly and follow the manufacturer's recommended pressures.

Checking the condition of a motorcycle tyre
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this dashboard symbol indicate?

532. What does this dashboard symbol indicate?

Charging-system warning.
Engine-temperature warning.
Low washer fluid.
✓ Low fuel level.

This symbol indicates that the fuel level is low. Refuel soon to reduce the risk of running out of fuel.

Low-fuel warning symbol on the dashboard
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Which selector position is used when parking the vehicle?

533. Which selector position is used when parking the vehicle?

✓ P (Park).
N (Neutral).
D (Drive).
R (Reverse).

Select P (Park) when parking an automatic vehicle. Park locks the transmission, but the parking brake should also be applied to secure the vehicle.

Automatic gear selector with P, R, N and D positions
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if the engine-temperature warning shows overheating?

534. What should you do if the engine-temperature warning shows overheating?

Open the coolant cap immediately to release heat.
Increase engine speed to improve coolant circulation.
✓ Stop safely, switch off the engine, and allow it to cool.
Continue driving slowly until the warning disappears.

Continuing to drive an overheating vehicle can cause severe damage. Allow the engine to cool and follow the manufacturer's instructions.

Engine-overheating warning on the dashboard
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you avoid sudden braking when it is not necessary?

535. Why should you avoid sudden braking when it is not necessary?

It makes the brakes less effective afterwards.
✓ Vehicles behind may not have time to react.
It makes the steering less responsive afterwards.
It prevents the brake lights from working properly.

Sudden braking can surprise drivers behind you and increase the risk of a rear-end collision.

Following traffic and the risk of sudden braking
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do when approaching stationary or slow-moving traffic on a motorway?

536. What should you do when approaching stationary or slow-moving traffic on a motorway?

✓ Reduce speed early and be prepared to stop.
Brake only when the vehicle ahead begins braking.
Follow the vehicle ahead closely to keep traffic moving.
Maintain speed until you are close to the queue.

Motorway queues can appear suddenly. Early braking gives following traffic more time to react.

Slow-moving traffic ahead on a motorway
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this dashboard symbol indicate?

537. What does this dashboard symbol indicate?

Lane-departure warning.
✓ Forward-collision warning.
Electronic stability control.
Adaptive cruise control.

This symbol relates to the forward-collision warning or automatic emergency braking system. It may warn the driver when the vehicle detects a risk of collision with traffic ahead.

Forward-collision warning symbol on the dashboard
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What is the main safety risk of aggressive driving?

538. What is the main safety risk of aggressive driving?

✓ It increases the risk of crashes.
It can increase tyre and brake wear.
It can increase fuel consumption.
It may attract the attention of the police.

Aggressive driving, such as tailgating, speeding, or sudden lane changes, reduces safety margins and increases the risk of crashes and conflict with other road users.

Driver displaying aggressive behaviour in traffic
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
When should you select P (Park) in an automatic vehicle?

539. When should you select P (Park) in an automatic vehicle?

Whenever you want to reduce speed.
Before braking to a stop.
✓ After the vehicle has come to a complete stop.
While the vehicle is still moving slowly.

Select P (Park) only after the vehicle has come to a complete stop. Selecting Park while the vehicle is moving can damage the transmission.

Selecting Park after an automatic vehicle stops
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Are winter tyres generally required in Italy?

540. Are winter tyres generally required in Italy?

Yes, throughout the year.
Yes, throughout winter.
✓ No.

Winter tyres are not generally required for cars in Italy, although they may still be recommended or required in specific situations.

Winter tyres for cold-weather driving
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Who is responsible for staying safe when crossing the road?

541. Who is responsible for staying safe when crossing the road?

Only pedestrians once they enter the road.
✓ Everyone using the road.
Only the person who creates the danger.
Only drivers when pedestrians have priority.

Road safety is a shared responsibility. Pedestrians, drivers, and cyclists all need to stay alert and follow the rules.

Pedestrians and traffic sharing a road crossing
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this dashboard symbol indicate?

542. What does this dashboard symbol indicate?

Parking assistance.
✓ Adaptive cruise control.
Automatic start-stop system.
Lane-departure warning.

This symbol relates to adaptive cruise control (ACC). The system can maintain a selected speed and automatically adjust the vehicle's speed to help maintain a set distance from traffic ahead.

Adaptive cruise-control symbol on the dashboard
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you normally do before starting an automatic vehicle?

543. What should you normally do before starting an automatic vehicle?

✓ Select P or N and press the brake pedal.
Leave the selector between two positions.
Select R and release the parking brake.
Select D and press the accelerator.

Before starting an automatic vehicle, make sure P (Park) or N (Neutral) is selected and press the brake pedal. Many automatic vehicles will only allow the engine to start when these conditions are met.

Gear selector and brake before starting an automatic vehicle
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should motorcyclists take extra care on wet road markings?

544. Why should motorcyclists take extra care on wet road markings?

They can increase the motorcycle's engine temperature.
✓ They can provide less grip than the surrounding road.
They can prevent the indicators from working.
They can make the brakes overheat.

Wet painted road markings can provide less grip than the surrounding road surface. Ride smoothly over them and avoid sudden braking, acceleration or steering that could cause the tyres to lose grip.

Motorcycle approaching wet painted road markings
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Is a fire extinguisher required in cars in Italy?

545. Is a fire extinguisher required in cars in Italy?

✓ No.
Yes.

Cars in Italy are not generally required to carry a fire extinguisher.

Fire extinguisher carried in a vehicle
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Which factors can increase a vehicle's stopping distance?

546. Which factors can increase a vehicle's stopping distance?

Using dipped headlights and keeping the windows closed.
✓ Higher speed, slower reactions, poor grip, and vehicle condition.
Having a full fuel tank and adjusted mirrors.
Lower speed, dry roads, and good tyres.

Stopping distance can increase because of higher speed, slower driver reactions, reduced tyre grip, poor weather or road conditions, worn tyres, weak brakes, or a heavier vehicle. Both the driver's reaction distance and the vehicle's braking distance can be affected.

Road and vehicle conditions affecting stopping distance
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you press the clutch pedal fully when changing gear?

547. Why should you press the clutch pedal fully when changing gear?

To increase engine speed.
To lock the gear lever in position.
✓ To disengage the engine fully from the transmission.
To apply the brakes.

Pressing the clutch pedal fully disengages the engine from the transmission, allowing the gear to be changed smoothly and reducing unnecessary wear on the gearbox and clutch.

Clutch pedal pressed fully for a gear change
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if your vehicle begins to skid on ice?

548. What should you do if your vehicle begins to skid on ice?

Apply the parking brake to straighten the vehicle.
Press the brake pedal hard and hold it.
✓ Ease off the accelerator and steer smoothly in the direction you want to travel.
Accelerate sharply to regain traction.

Avoid sudden braking or steering. Look where you want to go and use gentle controls while the tyres regain grip.

Vehicle skidding on an icy road
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if spray from other vehicles makes it hard to see?

549. What should you do if spray from other vehicles makes it hard to see?

Use main beam so the spray is easier to see through.
Speed up to move out of the spray more quickly.
✓ Slow down and increase following distance.
Change lanes immediately to find a clearer view.

Spray can seriously reduce visibility. Slowing down and increasing your distance gives you more time and a clearer view.

Road spray from a vehicle ahead
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this dashboard symbol indicate?

550. What does this dashboard symbol indicate?

✓ Brake-system warning.
Parking brake applied.
Brake-pad wear warning.
Anti-lock braking system warning.

This symbol indicates a possible brake-system fault. If it remains illuminated after the parking brake is released, stop safely and have the braking system checked.

Brake-system warning symbol on the dashboard
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA