Support us

QuizTraffic rulesTurkey

Test your knowledge with our multiple-choice quiz. Learn from each answer and improve your understanding of the traffic rules and road signs of Turkey.

For informational purposes only. Always follow official regulations. Some content and images were created with AI assistance.

Traffic signs
Traffic rules
Turkey
True/false 17 Turkey 30 Car controls 109 Dashboard lights 40 Priority rules 9 Pedestrians 19 Cyclists 20 Show all 597
What should you do before refuelling a petrol or diesel vehicle?

101. What should you do before refuelling a petrol or diesel vehicle?

Switch on the hazard lights while refuelling.
Increase the engine speed before removing the fuel cap.
Keep the engine idling if the vehicle is outside.
✓ Switch off the engine before starting to refuel.

Switch off the engine before refuelling. Fuel vapours are flammable, so avoid ignition sources and follow the safety instructions at the filling station. If fuel is spilled, do not start the vehicle until the situation has been made safe.

Vehicle at a pump before refuelling
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Does driving at the speed limit always mean your speed is safe?

102. Does driving at the speed limit always mean your speed is safe?

Yes, if your vehicle is in good condition.
✓ No, you may need to drive more slowly for the conditions.
Yes, the speed limit is always the safest speed.
Only when driving outside built-up areas.

A speed limit is a maximum permitted speed, not a target. You may need to drive more slowly because of traffic, poor visibility, weather, road conditions, pedestrians, cyclists, or other hazards.

Speed-limit sign and changing road conditions
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you not overtake near the top of a hill?

103. Why should you not overtake near the top of a hill?

Speed limits always decrease near hill crests.
✓ You may not see oncoming traffic or hidden hazards.
Your engine loses power near the top of a hill.
Vehicles ahead always have priority on hills.

Near the top of a hill, your view ahead is limited. Oncoming vehicles, cyclists, pedestrians, or obstacles may be hidden.

Hill crest hiding the road ahead
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you not ignore temporary speed limits?

104. Why should you not ignore temporary speed limits?

They apply only to road workers.
They apply only when traffic is congested.
✓ They are used to protect people and manage hazards.
They can be ignored when the road looks clear.

Temporary speed limits may be used near roadworks, accidents, events, or dangerous conditions. They help keep traffic safe.

Temporary speed-limit sign at roadworks
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you avoid stopping in a blind spot of a large vehicle?

105. Why should you avoid stopping in a blind spot of a large vehicle?

The driver can always see you in the mirrors.
Blind spots only matter when a vehicle is reversing.
✓ The driver may not be able to see you.
Large vehicles always have priority when changing lanes.

Large vehicles have bigger blind spots. If you stop where the driver cannot see you, you may be at risk when the vehicle moves or turns.

Vehicle positioned in a large vehicle's blind spot
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do with a manual parking brake before driving away?

106. What should you do with a manual parking brake before driving away?

Apply it only after moving off.
Pull it up further.
Leave it partly applied.
✓ Release it fully.

The manual parking brake should be released fully before driving away. Driving with it partly applied can cause unnecessary brake wear and overheating.

Releasing a manual handbrake before driving away
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if your vehicle begins to aquaplane?

107. What should you do if your vehicle begins to aquaplane?

✓ Ease off the accelerator and keep steering gently.
Brake firmly to force the tyres back onto the road.
Change lanes immediately to find a drier surface.
Turn the steering wheel sharply to regain grip.

Aquaplaning happens when the tyres lose contact with the road surface. Ease off the accelerator, avoid sudden movements, and wait for grip to return.

Vehicle losing tyre contact on a water-covered road
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Must cars carry equipment for dealing with a puncture in Turkey?

108. Must cars carry equipment for dealing with a puncture in Turkey?

✓ Yes.
No.

Cars in Turkey are generally required to carry equipment for dealing with a puncture, such as a spare wheel or tyre repair kit.

Vehicle equipment for dealing with a puncture
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this dashboard symbol indicate?

109. What does this dashboard symbol indicate?

Low tyre pressure.
✓ Electronic stability control.
Engine-management warning.
Anti-lock braking system.

This symbol relates to the electronic stability control (ESC) system. It may flash when the system is actively helping to maintain stability. If it remains illuminated, the system may be switched off or have a fault.

Electronic stability control symbol on the dashboard
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if traffic beyond a railway crossing is blocked?

110. What should you do if traffic beyond a railway crossing is blocked?

Follow the vehicle ahead closely across the tracks.
Enter the crossing and wait for traffic to move.
✓ Wait until there is enough space to clear the tracks completely.
Cross quickly before the warning signals activate.

Never enter a railway crossing unless you can clear the tracks completely. If traffic ahead is blocked, wait before the crossing so you cannot become trapped on the railway.

Congested traffic beyond a railway crossing
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should cyclists do when riding over loose gravel or road debris?

111. What should cyclists do when riding over loose gravel or road debris?

Accelerate to keep the bicycle stable.
Brake hard while turning.
✓ Reduce speed and steer smoothly.
Keep the same speed as on a dry, smooth road.

Loose material reduces tyre grip. Smooth steering and controlled speed lower the chance of losing balance.

Cyclist riding over loose gravel
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Are bicycle lights required at night in Turkey?

112. Are bicycle lights required at night in Turkey?

✓ Yes.
No.

Cyclists in Turkey are generally required to use bicycle lights at night.

Bicycle lights used at night
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why must a roof load be securely attached?

113. Why must a roof load be securely attached?

Because the roof will hold the load in place while driving.
Because light roof loads cannot be affected by the wind.
To keep the vehicle within its normal height.
✓ It could shift or fall and create a serious hazard.

A roof load is exposed to strong airflow and movement. It must be restrained correctly and kept within the permitted limits.

Load secured to a vehicle's roof
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why is riding a bicycle after drinking alcohol dangerous?

114. Why is riding a bicycle after drinking alcohol dangerous?

✓ Alcohol can reduce your balance, coordination, judgement, and reaction time.
Alcohol affects driving more than cycling.
Cycling after drinking is safe on quiet roads.
A small amount of alcohol improves balance.

Alcohol can make it harder to balance, steer, judge distances, and react to hazards. Riding a bicycle while impaired may also be against the law.

Alcohol consumption and bicycle-riding safety
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you reduce speed in fog?

115. Why should you reduce speed in fog?

✓ Because you have less time to react to hazards you cannot see.
To reduce vehicle emissions.
To prevent moisture from entering the engine.
To reduce fuel consumption.

Fog can hide obstacles, pedestrians, and other vehicles. Lower speed gives you more time to react.

Fog limiting a driver's view ahead
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you follow the manufacturer's service schedule?

116. Why should you follow the manufacturer's service schedule?

It guarantees that no faults will develop between services.
It allows vehicle problems to be ignored until the next service.
It prevents normal wear on important vehicle components.
✓ Regular servicing can identify wear and maintain safety and reliability.

Scheduled servicing helps ensure that brakes, tyres, fluids, filters, steering, suspension, and other important systems are checked and maintained before faults become more serious.

Vehicle maintenance following a servicing schedule
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you normally do before changing gear in a manual vehicle?

117. What should you normally do before changing gear in a manual vehicle?

Apply the parking brake.
✓ Press the clutch pedal fully.
Press the accelerator pedal fully.
Switch off the engine.

Pressing the clutch pedal disconnects the engine from the transmission so that another gear can be selected. After changing gear, the clutch should be released smoothly.

Clutch operation when changing gear in a manual vehicle
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this dashboard symbol indicate?

118. What does this dashboard symbol indicate?

Low tyre pressure.
✓ A general warning requiring attention.
A brake-system fault.
An engine-management fault.

This is a general or master warning symbol. It indicates that the vehicle has detected a condition requiring attention and is often accompanied by a message or another warning on the instrument display.

General warning symbol on the dashboard
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Are motorcycle riders generally required to wear a helmet in Turkey?

119. Are motorcycle riders generally required to wear a helmet in Turkey?

✓ Yes.
No.

Motorcycle riders in Turkey are generally required to wear an approved helmet.

Motorcyclist wearing a protective helmet
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

120. What does this vehicle-control symbol indicate?

Cabin fan speed.
Air recirculation.
✓ Airflow direction.
Air conditioning.

This control selects the direction of the ventilation airflow, such as towards the face, feet or windscreen.

Control for directing cabin ventilation airflow
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do before driving down a long, steep hill?

121. What should you do before driving down a long, steep hill?

✓ Reduce speed and select a suitable lower gear.
Select a higher gear to reduce engine resistance.
Coast in neutral to save fuel.
Rely mainly on continuous braking to control speed.

A lower gear helps control your speed and reduces the amount of continuous braking needed on a long descent.

Vehicle approaching a long, steep descent
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
You must stop at a red traffic light.

122. You must stop at a red traffic light.

False.
✓ True.

A red traffic light means you must stop and wait until it is allowed to proceed.

Vehicle stopped at a red traffic light
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should the windscreen washer reservoir contain suitable washer fluid?

123. Why should the windscreen washer reservoir contain suitable washer fluid?

The reservoir needs fluid only when the windscreen is visibly dirty.
Washer fluid is needed only in freezing weather.
Any household cleaning product can be used instead.
✓ It helps remove dirt, salt, insects, and spray from the windscreen.

A clear windscreen is essential for safe observation. Suitable washer fluid helps clean the glass and may provide protection against freezing in cold conditions.

Windscreen washer-fluid reservoir in a vehicle
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you leave a much larger following distance on an icy road?

124. Why should you leave a much larger following distance on an icy road?

✓ Because stopping distances can be much longer.
To prevent ice from forming on the windscreen.
Because ice increases tyre wear.
To give the engine more time to warm up.

Tyres have much less grip on ice, so braking takes longer. Extra distance gives you more time to slow down safely.

Following distance between vehicles on an icy road
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does the SET function of cruise control normally do?

125. What does the SET function of cruise control normally do?

Applies the brakes automatically.
✓ Stores the current speed as the cruising speed.
Returns to a previously stored speed.
Switches cruise control off.

The SET function normally stores the vehicle's current speed as the cruise-control speed. Use it only when the road, traffic, and driving conditions are suitable.

SET button for storing a cruising speed
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if strong winds push your vehicle sideways?

126. What should you do if strong winds push your vehicle sideways?

Turn sharply against the direction of the wind.
Release the steering wheel briefly and let the vehicle settle.
✓ Keep calm and steer smoothly to maintain your lane.
Brake hard immediately to stop the vehicle moving sideways.

Strong winds can push your vehicle off course, especially at higher speeds. Reduce speed and use smooth steering to stay in control.

Crosswind affecting a vehicle's road position
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do after hitting a deep pothole hard?

127. What should you do after hitting a deep pothole hard?

✓ Check for tyre or wheel damage when it is safe to stop.
Continue driving normally if the tyre still looks inflated.
Reduce the tyre pressure to absorb further bumps.
Brake sharply to check whether the wheels are damaged.

A hard impact with a pothole can damage tyres, wheel rims, steering, suspension, or wheel alignment. When it is safe to stop, inspect the tyres and wheels and pay attention to unusual vibration, pulling, or steering changes. Have the vehicle checked if you suspect damage.

Checking a tyre and wheel after hitting a pothole
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should a seat belt not be twisted when worn?

128. Why should a seat belt not be twisted when worn?

A twisted belt makes the brakes less effective.
✓ A flat belt spreads collision forces more effectively.
A twisted belt prevents the airbags from working.
A flat belt makes the seat easier to adjust.

A seat belt should lie flat against the body without twists. A twisted belt concentrates force over a smaller area and may provide less effective protection in a collision.

Twisted seat belt across an occupant's body
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why is it important to make yourself visible at night?

129. Why is it important to make yourself visible at night?

To make it safe to walk closer to moving traffic.
To avoid checking for approaching vehicles.
To ensure drivers can always stop in time.
✓ To make drivers see you more easily.

Bright or reflective clothing helps drivers notice pedestrians in low-light conditions.

Pedestrian visibility beside a road at night
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does the ACC position of a traditional ignition switch normally allow?

130. What does the ACC position of a traditional ignition switch normally allow?

The transmission to select Drive.
The starter motor to turn the engine.
The parking brake to release.
✓ Electrical accessories to be used without starting the engine.

The ACC (accessory) position normally supplies power to certain electrical accessories, such as the audio system, without starting the engine. The exact functions available can vary between vehicles.

ACC accessory position on an ignition switch
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Which selector position prevents drive being transmitted to the wheels?

131. Which selector position prevents drive being transmitted to the wheels?

✓ N (Neutral).
R (Reverse).
D (Drive).
P (Park).

Select N (Neutral) when drive should not be transmitted to the wheels. Unlike Park, Neutral does not lock the transmission to prevent the vehicle from rolling.

Automatic gear selector with P, R, N and D positions
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you avoid sounding the horn near horses?

132. Why should you avoid sounding the horn near horses?

The horn may make the horse move faster.
The rider may think you are signalling them to stop.
✓ The noise may frighten them.
Using the horn gives the horse rider priority.

Horses can be startled by sudden or loud noises and may move unpredictably. Slow down, give them plenty of space, and avoid using the horn unless necessary.

Vehicle approaching a horse and rider
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you normally select before leaving an automatic vehicle parked?

133. What should you normally select before leaving an automatic vehicle parked?

N (Neutral).
D (Drive).
✓ P (Park).
R (Reverse).

Select P (Park) before leaving an automatic vehicle parked. Park locks the transmission to help prevent the vehicle from rolling; the parking brake should also be applied.

Park position on an automatic gear selector
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should cyclists avoid using a handheld phone?

134. Why should cyclists avoid using a handheld phone?

Because a phone may be used only at low speeds.
Because phones must be switched off while cycling.
Because phone signals can interfere with traffic lights.
✓ It reduces your control and attention.

Using a phone can distract you and may prevent you from steering, braking, or reacting properly.

Cyclist using a handheld phone
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What is the safest way to cross the road with a child?

135. What is the safest way to cross the road with a child?

Ask them to decide when it is safe to cross.
✓ Hold their hand and keep them close.
Let them run once the first lane is clear.
Let them walk slightly ahead of you.

Children can be unpredictable near traffic. Keep them close and guide them safely across the road.

Adult holding a child's hand while crossing the road
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
How should you normally brake on a motorcycle?

136. How should you normally brake on a motorcycle?

Use only the front brake.
✓ Use both brakes smoothly and progressively.
Use only the rear brake.
Alternate between the front and rear brakes.

During normal braking, use both the front and rear brakes smoothly and progressively. The front brake normally provides much of the braking force, while the rear brake also helps slow and stabilise the motorcycle. Sudden or poorly balanced braking can reduce stability or cause a wheel to lose grip.

Motorcyclist using the front and rear brakes
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Which control is normally used to operate the direction indicators?

137. Which control is normally used to operate the direction indicators?

The hazard-warning button.
The headlight-level control.
✓ The steering-column indicator stalk.
The windscreen-wiper stalk.

The direction indicators are normally operated using a stalk beside the steering wheel. Moving the stalk up or down activates the indicators on the corresponding side of the vehicle.

Steering-column stalk for the direction indicators
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do when traffic lights change to amber as you approach?

138. What should you do when traffic lights change to amber as you approach?

✓ Stop if you can do so safely.
Continue at the same speed if the junction looks clear.
Treat it like a green light until it turns red.
Accelerate to pass before the light turns red.

An amber light warns that the signal is changing. Stop if it is safe, but avoid sudden braking that could cause danger behind you.

Vehicle approaching an amber traffic light
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should the head restraint be adjusted correctly?

139. Why should the head restraint be adjusted correctly?

To improve rear visibility.
To make the seat belt tighter.
✓ To reduce the risk of neck injury in a collision.
To support the lower back.

A correctly adjusted head restraint helps support the head and can reduce the risk of neck injury, especially in a rear-end collision. The top of the restraint should normally be level with the top of the head.

Adjusting a vehicle seat's head restraint
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this dashboard symbol indicate?

140. What does this dashboard symbol indicate?

Rear fog lights.
✓ Exterior-light failure.
Engine-management warning.
Dipped headlights.

This symbol indicates a possible failure of an exterior vehicle light, such as a headlight, tail light, brake light or indicator. Check the vehicle's exterior lights and replace or repair any faulty light.

Exterior-light failure warning symbol on the dashboard
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Which pedal is used to increase the vehicle's speed?

141. Which pedal is used to increase the vehicle's speed?

The brake pedal.
The clutch pedal.
The footrest.
✓ The accelerator pedal.

The accelerator pedal controls the amount of power delivered by the engine and is used to increase or maintain the vehicle's speed. It is the right-hand pedal.

Accelerator pedal in the driver's footwell
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you leave extra space behind a motorcycle?

142. Why should you leave extra space behind a motorcycle?

Following closely makes it easier to overtake safely.
Motorcycles always travel more slowly than cars.
✓ Motorcycles can slow down quickly and are more vulnerable.
Motorcyclists cannot see vehicles directly behind them.

Motorcyclists are more exposed than car drivers. Extra following distance gives you more time to react safely.

Following distance behind a motorcycle
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do when driving through heavy rain?

143. What should you do when driving through heavy rain?

✓ Reduce speed and increase your following distance.
Accelerate through the rain to clear it more quickly.
Use main beam to improve visibility.
Drive closer to the vehicle ahead for guidance.

Heavy rain reduces grip and visibility. Lower speed and extra distance give you more time to react safely.

Vehicle travelling through heavy rain
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if another driver does not give way when they should?

144. What should you do if another driver does not give way when they should?

✓ Slow down and avoid a collision.
Use the horn and continue at the same speed.
Move closer so the other driver is forced to give way.
Maintain your speed because you have priority.

Even if you have priority, safety comes first. Slow down, stay calm, and avoid creating a dangerous situation.

Conflicting vehicle movements at a junction
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why are tyre condition and pressure especially important on a motorcycle?

145. Why are tyre condition and pressure especially important on a motorcycle?

They determine how brightly the lights work.
✓ They directly affect grip, stability, and braking.
They matter only when carrying a passenger.
They mainly affect the engine temperature.

A motorcycle relies on a relatively small area of tyre contact with the road. Correct tyre pressure, tread and condition are important for grip, steering, stability and braking. Check the tyres regularly and follow the manufacturer's recommended pressures.

Checking the condition of a motorcycle tyre
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if you approach slow-moving farm machinery?

146. What should you do if you approach slow-moving farm machinery?

✓ Keep a safe distance and overtake only when safe.
Overtake as soon as the road becomes slightly wider.
Drive close behind until there is room to pass.
Use your horn so the driver moves aside.

Farm machinery may be wide, slow, or turn unexpectedly. Keep distance and only overtake when you have a clear view and enough space.

Vehicle approaching slow-moving farm machinery
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you avoid resting your hand on the gear lever while driving?

147. Why should you avoid resting your hand on the gear lever while driving?

It can apply the parking brake.
✓ It can cause unnecessary wear in the gear-selection mechanism.
It can increase engine speed.
It can disengage the clutch.

Resting your hand on the gear lever can place unnecessary pressure on parts of the gear-selection mechanism and contribute to wear. Keep both hands on the steering wheel when you are not changing gear.

Driver's hand resting on a manual gear lever
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should a front passenger keep their feet off the dashboard?

148. Why should a front passenger keep their feet off the dashboard?

✓ It can greatly increase the risk of injury if the airbag deploys.
It can make the front seat slide forwards during braking.
It can prevent the engine from cooling properly.
It can prevent the passenger airbag from deploying.

A front airbag deploys very quickly and with considerable force. If a passenger has their feet or legs on the dashboard, airbag deployment can force their legs backwards and greatly increase the risk of serious injury. Passengers should sit normally with their feet in the footwell and wear their seat belts correctly. The driver should make sure everyone is seated and restrained safely before setting off.

Passenger resting their feet on the dashboard
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you avoid changing lanes inside an intersection?

149. Why should you avoid changing lanes inside an intersection?

It can make it harder to maintain a steady speed.
✓ It can confuse other road users and increase collision risk.
It can make road markings harder to follow.
It can make your route through the junction longer.

Changing lanes inside an intersection can surprise drivers, cyclists, and pedestrians. It is safer to choose the correct lane before entering.

Vehicle changing lanes within a junction
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if another driver behaves aggressively towards you?

150. What should you do if another driver behaves aggressively towards you?

Follow them closely to show your disapproval.
Respond with your horn and gestures.
✓ Stay calm, avoid confrontation, and create more distance.
Speed up to prevent them from passing you.

If another driver behaves aggressively, do not retaliate or become involved in a confrontation. Stay calm, increase the distance between you, and let the other vehicle move away when possible. If you feel threatened, go to a safe public place and seek appropriate assistance.

Driver facing aggressive behaviour from another road user
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA