Support us

QuizTraffic rulesNew Zealand

This interesting quiz helps you test your knowledge in a clear and visual way. With easy multiple-choice questions, you can quickly build confidence and learn new facts while keeping it simple, interactive, and fun.

Traffic signs
Traffic rules
New Zealand
True/false 17 New Zealand 28 Car controls 109 Dashboard lights 40 Priority rules 9 Pedestrians 19 Cyclists 20 Show all 595
What does this dashboard symbol indicate?

201. What does this dashboard symbol indicate?

✓ Direction indicators.
Dipped headlights.
Main beam.
Hazard warning lights.

This symbol indicates that a direction indicator is operating. The flashing indicator shows the direction in which the driver intends to turn or change position on the road.

Direction-indicator symbol on the dashboard
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if fuel spills while you are refuelling?

202. What should you do if fuel spills while you are refuelling?

Continue filling the tank and clean it up afterwards.
Wash the spill away with water and continue refuelling.
✓ Stop refuelling, avoid ignition sources, and alert station staff.
Start the engine and move the vehicle immediately.

If fuel is spilled, stop refuelling immediately and keep flames, sparks, and other ignition sources away. Do not start the vehicle until the situation is safe. Alert filling-station staff and follow their instructions for dealing with the spill.

Fuel spilled during refuelling
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this vehicle-control button operate?

203. What does this vehicle-control button operate?

The parking brake.
✓ The engine or drive system.
The automatic start-stop system.
The hazard warning lights.

The engine start/stop button is used to start or switch off the vehicle's engine or electric drive system. Starting the vehicle normally also requires the brake or clutch pedal to be pressed.

Engine start/stop button in a vehicle
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this vehicle-control symbol indicate?

204. What does this vehicle-control symbol indicate?

Automatic headlights.
✓ Headlight level adjustment.
Main beam.
Instrument-panel brightness.

This control adjusts the vertical aim of the headlights. It can be used to lower the beam when the vehicle is heavily loaded, helping to avoid dazzling other road users.

Control for adjusting the headlight beam height
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you expect if the engine suddenly stalls while the vehicle is moving?

205. What should you expect if the engine suddenly stalls while the vehicle is moving?

✓ Steering and braking may require more effort, so move to a safe place.
Power assistance will continue working normally.
The steering and brakes will stop working completely.
The vehicle will stop immediately when the engine stops.

Power assistance may be reduced when the engine stops. Keep control, use the hazard lights if needed, and steer toward a safe stopping area.

Driver responding to an engine stall while moving
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does AUTO on a windscreen-wiper control normally do?

206. What does AUTO on a windscreen-wiper control normally do?

✓ Operates the wipers automatically when rain is detected.
Runs the wipers continuously at maximum speed.
Sprays washer fluid automatically.
Operates only the rear wiper.

When AUTO is selected, a rain sensor can operate the windscreen wipers automatically and adjust their operation according to the amount of moisture detected on the windscreen.

AUTO setting on the windscreen-wiper control
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What is aquaplaning?

207. What is aquaplaning?

When wet brakes become too hot to work properly.
When steering becomes heavier on a dry road.
When low tyre pressure causes a tyre to burst.
✓ When tyres ride on a layer of water and lose contact with the road.

Aquaplaning occurs when water builds up between the tyres and the road, causing a loss of grip and control. The risk increases at higher speeds.

Water separating a tyre from the road surface
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this dashboard symbol indicate?

208. What does this dashboard symbol indicate?

Low engine oil.
Low washer fluid.
Low tyre pressure.
✓ Low engine coolant level.

This symbol indicates that the engine coolant level is low. Check the coolant level when the engine is cool and refill it with the correct coolant if necessary.

Low coolant-level warning symbol on the dashboard
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this dashboard symbol indicate?

209. What does this dashboard symbol indicate?

Low tyre pressure.
Electronic stability control.
Charging-system warning.
✓ Power-steering warning.

This symbol indicates a possible fault with the power-steering system. Steering assistance may be reduced or unavailable, making the steering wheel harder to turn.

Power-steering warning symbol on the dashboard
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you avoid if your vehicle starts to skid?

210. What should you avoid if your vehicle starts to skid?

Use smooth steering movements.
Allow the tyres time to regain grip.
Stay calm and maintain control.
✓ Sudden braking, acceleration, or sharp steering.

Sudden braking, acceleration, or steering can make a skid worse. Stay calm and use smooth controls while the tyres regain grip.

Vehicle beginning to skid
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you remove dark sunglasses before entering a tunnel?

211. Why should you remove dark sunglasses before entering a tunnel?

To prevent the lenses from reflecting tunnel lights.
✓ Your eyes need to adjust to the lower light level.
Because tunnel lighting can damage dark lenses.
To prevent the automatic lights from switching on.

Dark sunglasses reduce the amount of light reaching your eyes and can make hazards inside a tunnel harder to see.

Driver removing sunglasses before entering a tunnel
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What is the main risk when following a vehicle with limited rear visibility?

212. What is the main risk when following a vehicle with limited rear visibility?

✓ The driver may not see you clearly.
The vehicle must always travel more slowly.
The driver cannot use the side mirrors.
The vehicle has priority when changing lanes.

Vans, trucks, and vehicles with blocked rear windows may have limited visibility. Keep extra distance and avoid sitting in blind spots.

Vehicle with limited rearward visibility
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should a motorcyclist do before entering a bend?

213. What should a motorcyclist do before entering a bend?

✓ Reduce speed before the bend and look through it.
Accelerate before checking how sharp the bend is.
Brake hard after beginning to lean.
Look only at the road directly in front of the wheel.

Adjust your speed before entering the bend so you can steer smoothly and remain within a safe position. Look through the bend towards where you want to travel and be prepared for hazards that may be hidden from view.

Motorcyclist approaching a bend
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why must luggage or other objects not obstruct the driver's view?

214. Why must luggage or other objects not obstruct the driver's view?

They can increase tyre pressure.
They can make the steering heavier.
They can reduce the brightness of the headlights.
✓ They can hide hazards and reduce the driver's ability to see safely.

The driver must have a clear view of the road and surroundings. Luggage, decorations, or other objects that obstruct the windscreen, windows, or mirrors can hide pedestrians, cyclists, vehicles, signs, or other hazards.

Luggage obstructing the driver's view
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you leave extra space behind a vehicle carrying animals?

215. Why should you leave extra space behind a vehicle carrying animals?

Because these vehicles always have priority.
Because they cannot use their horn.
✓ Because it may move slowly or stop unexpectedly.
Because they must always travel in the centre of the road.

Vehicles transporting animals may accelerate slowly, take bends carefully, or brake gently to protect their load.

Vehicle following an animal transporter
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if fog becomes so thick that you cannot see safely?

216. What should you do if fog becomes so thick that you cannot see safely?

✓ Slow down and stop in a safe location away from traffic if necessary.
Continue slowly by following the road markings.
Stop immediately in the traffic lane.
Follow the vehicle ahead closely for guidance.

If visibility becomes dangerously poor, find a safe place to stop rather than continuing without being able to see clearly.

Dense fog obscuring the road ahead
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
How should a motorcyclist brake in an emergency?

217. How should a motorcyclist brake in an emergency?

Grab the front brake as suddenly as possible.
Release both brakes before stopping.
Steer sharply while braking hard.
✓ Apply both brakes firmly and progressively.

During emergency braking, use both brakes firmly and progressively while keeping the motorcycle as upright and stable as practical. Avoid sudden steering. If ABS is fitted, maintain firm braking pressure and allow the system to work.

Motorcyclist making an emergency stop
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What is the safest way to cross the road with a child?

218. What is the safest way to cross the road with a child?

Ask them to decide when it is safe to cross.
Cross separately so everyone has more space.
Let them run once the first lane is clear.
✓ Hold their hand and keep them close.

Children can be unpredictable near traffic. Keep them close and guide them safely across the road.

Adult holding a child's hand while crossing the road
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do before refuelling a petrol or diesel vehicle?

219. What should you do before refuelling a petrol or diesel vehicle?

Leave the engine running to protect the battery.
✓ Switch off the engine before starting to refuel.
Switch on the hazard lights while refuelling.
Keep the engine idling if the vehicle is outside.

Switch off the engine before refuelling. Fuel vapours are flammable, so avoid ignition sources and follow the safety instructions at the filling station. If fuel is spilled, do not start the vehicle until the situation has been made safe.

Vehicle at a pump before refuelling
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if a friend who has been drinking wants to drive?

220. What should you do if a friend who has been drinking wants to drive?

✓ Encourage them not to drive and arrange safe transport.
Follow them home in another vehicle.
Let them drive if they say they feel sober.
Give them coffee and wait a short while.

Preventing an impaired person from driving can protect them, their passengers, and other road users. Arrange a sober driver, taxi, public transport, or accommodation.

Friends discussing safe transport after drinking
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this dashboard symbol indicate?

221. What does this dashboard symbol indicate?

Anti-lock braking system warning.
Low tyre pressure.
Brake-pad wear warning.
✓ Brake-system warning.

This symbol indicates a possible brake-system fault. If it remains illuminated after the parking brake is released, stop safely and have the braking system checked.

Brake-system warning symbol on the dashboard
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
You must stop at a red traffic light.

222. You must stop at a red traffic light.

False.
✓ True.

A red traffic light means you must stop and wait until it is allowed to proceed.

Vehicle stopped at a red traffic light
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this dashboard symbol indicate?

223. What does this dashboard symbol indicate?

✓ Immobiliser or anti-theft system.
Engine-management warning.
Door-open warning.
Charging-system warning.

This symbol relates to the vehicle's immobiliser or anti-theft system. If it remains illuminated or flashes unexpectedly, the vehicle may not recognise the key or there may be a fault in the security system.

Immobiliser indicator symbol on the dashboard
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do when approaching a stop sign?

224. What should you do when approaching a stop sign?

✓ Come to a complete stop before proceeding.
Slow down and stop only if traffic is approaching.
Give way without stopping if the road is clear.
Stop only after entering the junction.

A stop sign requires you to come to a complete stop at the required position. Check carefully for other road users and proceed only when it is safe.

Vehicle approaching a stop sign
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if oncoming headlights dazzle you at night?

225. What should you do if oncoming headlights dazzle you at night?

Turn on your interior lights to reduce the glare.
Look briefly at the headlights to judge their position.
Move closer to the centre of the road for a clearer view.
✓ Slow down and look toward the edge of your lane.

Bright headlights can reduce your vision. Avoid staring at them, slow down if needed, and use the road edge or lane markings to guide you safely.

Oncoming headlights dazzling a driver at night
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you keep a safe following distance?

226. Why should you keep a safe following distance?

To make overtaking easier.
To make your vehicle easier to see ahead.
✓ To have enough time to stop.
To reduce wear on the brakes.

A safe following distance gives you enough time to react if the vehicle in front slows down or stops suddenly.

Gap between a vehicle and the traffic ahead
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Where should you change a wheel after a puncture?

227. Where should you change a wheel after a puncture?

As close to moving traffic as possible to keep off the verge.
On a slight slope if the parking brake is applied.
On soft ground if the jack appears stable.
✓ On firm, level ground well away from moving traffic.

The vehicle must be stable and protected from traffic. Apply the parking brake and follow the manufacturer's wheel-changing instructions.

Wheel change on firm ground away from traffic
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What is the best place to cross the road?

228. What is the best place to cross the road?

At the shortest point, even if visibility is limited.
At a junction without checking for turning traffic.
✓ At a designated crossing.
Between parked vehicles if traffic appears quiet.

Use a designated crossing whenever possible. It is usually the safest place to cross the road.

Designated crossing for pedestrians
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do about a chip in the windscreen?

229. What should you do about a chip in the windscreen?

✓ Have it assessed and repaired promptly.
Ignore it if it is outside your direct view.
Clean the glass and continue driving normally.
Wait until the chip becomes a larger crack.

A chip can obstruct your view, weaken the glass, and develop into a larger crack. Have it checked and repaired promptly.

Stone chip in a vehicle's windscreen
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
You should check your mirrors before changing lanes.

230. You should check your mirrors before changing lanes.

False.
✓ True.

Checking your mirrors helps you see surrounding traffic before moving into another lane.

Driver checking a mirror before changing lanes
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Which selector position prevents drive being transmitted to the wheels?

231. Which selector position prevents drive being transmitted to the wheels?

D (Drive).
R (Reverse).
P (Park).
✓ N (Neutral).

Select N (Neutral) when drive should not be transmitted to the wheels. Unlike Park, Neutral does not lock the transmission to prevent the vehicle from rolling.

Automatic gear selector with P, R, N and D positions
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why can bridges and overpasses become icy before nearby roads?

232. Why can bridges and overpasses become icy before nearby roads?

Traffic usually moves faster across bridges.
✓ Cold air circulates above and below them.
Their barriers trap cold air on the road surface.
Bridges are always at a higher altitude.

Bridges lose heat from both their upper and lower surfaces, so they can freeze before roads built directly on the ground.

Icy surface on an exposed bridge
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do before driving with a load?

233. What should you do before driving with a load?

✓ Make sure it is properly secured and cannot move or fall.
Leave light items loose for short journeys.
Secure only the heaviest items.
Check the load only after you have started driving.

An unsecured load can shift, affect vehicle control, or fall into the road. Check that everything is safely restrained before moving.

Checking a vehicle's load before setting off
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do when construction vehicles enter or leave the road?

234. What should you do when construction vehicles enter or leave the road?

Drive closely behind it until there is room to pass.
✓ Slow down and be prepared for them to move across your path.
Use your horn so the driver waits for you.
Accelerate before the vehicle reaches the road.

Construction vehicles may move slowly, have limited visibility, or carry loose material. Give them time and space to manoeuvre.

Construction vehicle entering or leaving a road
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Who generally has priority at an uncontrolled intersection in New Zealand?

235. Who generally has priority at an uncontrolled intersection in New Zealand?

The largest vehicle.
The vehicle travelling fastest.
Traffic approaching from the left.
✓ Traffic approaching from the right.

At an uncontrolled intersection in New Zealand, you generally give way to traffic approaching from the right.

Vehicles approaching an uncontrolled junction from different directions
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should the driver's floor mat be properly secured?

236. Why should the driver's floor mat be properly secured?

It could prevent the seat belt from locking.
It could reduce the effectiveness of the airbags.
✓ It could slide forwards and interfere with the pedals.
It could make the steering wheel harder to turn.

A loose or incorrectly fitted floor mat can move into the pedal area and interfere with the accelerator, brake, or clutch. Make sure the driver's floor mat is correctly fitted, secured, and does not obstruct any pedal.

Driver's floor mat near the pedals
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you take regular breaks during a long journey?

237. Why should you take regular breaks during a long journey?

To make the journey feel shorter.
To improve fuel quality.
To reduce tyre pressure.
✓ To help prevent fatigue and maintain concentration.

Regular breaks during a long journey help reduce fatigue and maintain concentration. Do not wait until you are struggling to stay awake before stopping to rest.

Driver resting during a long journey
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do before driving if snow or ice covers your vehicle?

238. What should you do before driving if snow or ice covers your vehicle?

✓ Clear the windows, mirrors, lights, roof, and number plates.
Let the heater clear the ice while you drive.
Clear only the areas needed for your immediate view.
Clear only the windows and mirrors.

You need a clear view in every direction. Snow or ice left on the roof can also fall or blow onto other road users.

Clearing snow and ice from a vehicle before driving
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What is the purpose of the clutch pedal in a manual vehicle?

239. What is the purpose of the clutch pedal in a manual vehicle?

To increase the engine speed.
To slow the vehicle using the brakes.
To apply the parking brake.
✓ To disconnect the engine from the transmission.

Pressing the clutch pedal temporarily disconnects the engine from the transmission, allowing the driver to change gear or stop without stalling the engine.

Clutch pedal in a manual vehicle
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you avoid resting your foot on the clutch pedal while driving?

240. Why should you avoid resting your foot on the clutch pedal while driving?

It can increase tyre pressure.
✓ It can cause unnecessary clutch wear.
It can lock the steering.
It can apply the parking brake.

Resting your foot on the clutch pedal can apply slight pressure to the clutch mechanism and cause unnecessary wear. Keep your left foot off the clutch when it is not needed.

Foot position near the clutch pedal
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do before crossing behind a bus or large vehicle?

241. What should you do before crossing behind a bus or large vehicle?

✓ Wait until you have a clear view of the road.
Stay close behind the vehicle while crossing.
Cross if the nearest traffic lane appears clear.
Cross as soon as the vehicle has stopped.

Large vehicles can block your view and hide you from drivers. Wait until you can clearly see the road before crossing.

Pedestrian preparing to cross behind a bus
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
It is safer to drive faster than the speed limit when overtaking.

242. It is safer to drive faster than the speed limit when overtaking.

True.
✓ False.

You must still drive safely and obey traffic laws. Speeding increases risk and is not automatically justified by overtaking.

Vehicle overtaking another road user
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do before opening your car door near traffic?

243. What should you do before opening your car door near traffic?

Signal before opening the door without checking behind.
Check only for vehicles, not cyclists or pedestrians.
Open the door slowly and expect traffic to avoid you.
✓ Check for cyclists, pedestrians, and vehicles.

Before opening a car door, check carefully for cyclists, pedestrians, and vehicles to avoid causing a collision.

Checking for passing road users before opening a car door
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Which selector position is used when parking the vehicle?

244. Which selector position is used when parking the vehicle?

D (Drive).
R (Reverse).
✓ P (Park).
N (Neutral).

Select P (Park) when parking an automatic vehicle. Park locks the transmission, but the parking brake should also be applied to secure the vehicle.

Automatic gear selector with P, R, N and D positions
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why should you keep a dog on a leash near traffic?

245. Why should you keep a dog on a leash near traffic?

To give the dog priority when crossing the road.
To make it easier for drivers to hear the dog.
✓ To prevent it from suddenly running into the road.
To make approaching vehicles drive more slowly.

Dogs can react unpredictably to vehicles, people, noises, or other animals. Keeping a dog under close control on a leash near traffic reduces the risk of it suddenly entering the road and endangering itself or other road users.

Pedestrian keeping a dog on a leash near traffic
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do when temporary traffic lights show red?

246. What should you do when temporary traffic lights show red?

Only permanent traffic lights are valid.
Follow the vehicle ahead through the signal.
Proceed if no road workers are visible.
✓ Stop before the signal or temporary stop line.

Temporary traffic signals must be obeyed like permanent signals. Stop and wait until you are permitted to continue.

Red signal on temporary roadworks traffic lights
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this dashboard symbol indicate?

247. What does this dashboard symbol indicate?

✓ Exterior-light failure.
Charging-system warning.
Engine-management warning.
Dipped headlights.

This symbol indicates a possible failure of an exterior vehicle light, such as a headlight, tail light, brake light or indicator. Check the vehicle's exterior lights and replace or repair any faulty light.

Exterior-light failure warning symbol on the dashboard
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What does this dashboard symbol indicate?

248. What does this dashboard symbol indicate?

Engine-temperature warning.
Charging-system warning.
Low coolant level.
✓ Low engine oil level.

This symbol indicates that the engine oil level is low. Check the oil level according to the manufacturer's instructions and add the correct oil if necessary.

Low oil-level warning symbol on the dashboard
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
Why is it important to use bicycle lights at night?

249. Why is it important to use bicycle lights at night?

They give cyclists priority over other traffic.
They make reflective clothing unnecessary.
They are needed only on roads without street lighting.
✓ They help you see and help others notice you.

Front and rear lights improve visibility and make it easier for drivers, cyclists, and pedestrians to detect you.

Bicycle lights used when riding at night
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What should you do if a child runs onto the road ahead?

250. What should you do if a child runs onto the road ahead?

✓ Brake firmly and be prepared to stop.
Sound your horn and continue driving.
Accelerate to pass before the child moves further into the road.
Swerve immediately into the opposite lane.

Children can act unpredictably. Brake firmly, stay alert, and be prepared for more children to follow.

Child entering the road ahead of a vehicle
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA