Traffic rulesNew Zealand
Traffic rules
New Zealand
1. New Zealand
New Zealand lies in the southwestern Pacific Ocean and consists mainly of the North Island and South Island. Traffic drives on the left. Although the country is relatively compact, journeys can take longer than expected because many roads are narrow, winding and hilly, with mountain passes, unsealed sections and one-lane bridges still forming part of the road network. Snow and ice can affect alpine routes in winter, particularly on the South Island.
Most roads are free to use, and New Zealand has no nationwide vignette; there are currently only three toll roads, all on the North Island, using electronic number-plate-based collection without toll booths. The usual open-road maximum for light vehicles is 100 km/h, although 110 km/h applies on designated high-standard roads and many roads have lower posted limits. Road signs use standardised symbols and English, while te reo Māori and English increasingly appear together on bilingual signs.
AI-generated by Rijbewijs-online.be • WCIT • CC BY-SA
What is the alcohol limit for drivers in New Zealand?
Drivers aged 20 or older must not exceed 250 micrograms of alcohol per litre of breath or 50 milligrams per 100 millilitres of blood. Drivers under 20 have a zero-alcohol limit.
🔗 transport.govt.nz • New Zealand Ministry of Transport, current age-related alcohol limits
Can you use a mobile phone while driving in New Zealand?
You must not use a handheld phone for calls, texts, emails or similar communications while driving. An emergency call is excepted when stopping is unsafe or impracticable. Police advise using hands-free mode for calls and pulling over safely before texting or using other applications.
🔗 police.govt.nz • New Zealand Police, Being safe on the road, Driving with your phone; 🔗 police.govt.nz • New Zealand Police, phone and seatbelt enforcement guidance, 16 October 2026
When must children use a child seat in New Zealand?
Children under seven must use an approved child restraint suitable for their age and size. A seven-year-old must use an approved restraint if one is available; otherwise the applicable seat-belt rules apply. The driver is responsible for securing child passengers.
🔗 education.govt.nz • New Zealand Ministry of Education, child restraint and driver responsibility
2. Motorway
A motorway is a road specially designed and signposted for motor traffic. Motorways normally have separate carriageways for opposing traffic, controlled access through designated entrances and exits, no direct access to neighbouring properties, and no level crossings with other roads, railways or paths.
Special traffic rules apply on motorways. The permitted road users, speed limits, lane rules, tolls and emergency procedures vary between countries, so drivers must follow the local traffic signs and regulations.
Wikimedia.org • Jayswipe • CC0
What speed limit applies to cars on a motorway in New Zealand?
There is no separate universal motorway limit. Many sections are signed at 100 km/h or lower, while selected high-standard sections are signed higher. Follow the displayed limit and any lower restriction for your vehicle or licence.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — motorway
Start of a motorway.
English • A41-1.1 • Motorway begins. The motorway starts here. Motorway rules apply; obey the posted speed and access restrictions.
Sources
🔗 Commons.wikimedia.org (Mliu92 • CC BY-SA 4.0)
🔗 Nzta.govt.nz • NZTA sign specifications • A41-1.1
SVG source: Mliu92 • CC BY-SA 4.0 • Original revision 2015-06-14. Wikimedia original unmodified.
3. Speed limit
A speed limit is the maximum legal speed permitted on a road, lane or within a designated area. It may be established by general traffic law or indicated by fixed, variable or temporary traffic signs.
A speed limit is a maximum, not a target speed. Drivers must travel more slowly whenever traffic, visibility, weather, road conditions, vulnerable road users or the condition of the vehicle make the maximum permitted speed unsafe.
Wikimedia.org • Air55 • CC BY-SA
Which general speed limits should car drivers know in New Zealand?
For a light vehicle, the usual urban limit is 50 km/h and the open-road limit is generally 100 km/h, unless another limit is signed. A motorway does not have one separate universal maximum; its signs determine the applicable restriction. Lower limits and specifically authorised higher-speed sections must be read on the road itself.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — speed-limit
🔗 drive.govt.nz • NZ Government Drive — light-trailer90 km/h maximum
Does towing change New Zealand’s ordinary light-vehicle open-road maximum?
Yes. A light vehicle towing a trailer is generally limited to 90 km/h, even where a higher road limit is signed. A lower applicable road restriction still governs. Check the rule for the actual combination.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — speed-limit
🔗 drive.govt.nz • NZ Government Drive — light-trailer90 km/h maximum
4. Advisory speed
An advisory speed is a recommended speed for a particular road section or hazard rather than a legally imposed maximum speed. It may be shown near bends, junctions, steep gradients, roadworks or other locations where a lower speed can help drivers negotiate the road safely.
Drivers should treat an advisory speed as guidance for safe driving conditions and should travel even more slowly when weather, visibility, traffic or road conditions require it. A separate legally binding speed limit must still be obeyed.
Wikimedia.org • CC0
What does a New Zealand corner advisory-speed sign mean?
It recommends a speed for negotiating the corner safely. The advisory number is distinct from a regulatory maximum-speed limit. It warns that the road feature may require a lower speed than the road’s ordinary limit.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — advisory-speed
Should I drive below a New Zealand advisory speed in poor conditions?
Yes. Conditions such as a wet surface, poor visibility, traffic or the vehicle’s handling can make the recommended number too fast. Choose a speed that retains control and allows safe stopping; the recommendation is not a minimum.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — advisory-speed
What if New Zealand’s legal maximum is lower than a remembered advisory speed?
Follow the lower legal maximum, and slow further if necessary. A recommendation does not authorise speeding. Use the restrictions on the actual section instead of a remembered number from another bend or journey.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — advisory-speed
5. Bike path
A bike path is a part of a road or a separate route intended primarily or exclusively for people riding bicycles. It may be physically separated from motor traffic, marked on the road surface or identified by traffic signs.
Bike paths may be one-way, two-way or shared with other road users. The permitted users, direction of travel, priority rules and obligation to use the path depend on local traffic signs and regulations.
Wikimedia.org • Ingolfson • CC0
Must cyclists use a provided New Zealand cycle lane or path?
No. The Cycling Code says cyclists are not legally required to use cycle lanes or paths and may use the road instead. Choose a route suited to the conditions, while obeying its traffic controls and any restrictions that apply to the road.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — path-cyclist
🔗 nzta.govt.nz • NZTA — cycle-lane access for qualifying e-scooters from1 October2026
Are New Zealand cycle lanes reserved only for bicycles?
No. From 1 October 2026, the updated Cycling Code also permits e-scooters in cycle lanes. A marked lane therefore does not mean bicycle-only use. This change concerns cycle lanes; check the controls on separately designated paths.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — path-cyclist
🔗 nzta.govt.nz • NZTA — cycle-lane access for qualifying e-scooters from1 October2026
Is a New Zealand cycle lane the same as a separate cycle path?
No. A cycle lane is marked along the roadway. A separate path is away from the roadway and may be designated for cycling or shared with pedestrians. Check the signs and markings rather than treating every path beside a road as a reserved cycle lane.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — path-cyclist
🔗 nzta.govt.nz • NZTA — cycle-lane access for qualifying e-scooters from1 October2026
Mandatory path for cyclists.
English • R4-9.1 • Cycles only. The signed path or route is reserved for cycles. Observe any accompanying conditions.
Sources
🔗 Commons.wikimedia.org
🔗 Nzta.govt.nz • NZTA sign specifications • R4-9.1
Image via Commons.wikimedia.org
New Zealand Transport Agency • NZTA-Sign-Spec • Source revision 2020-04-22. Wikimedia original unmodified.
6. Pedestrian warning
A pedestrian warning is a traffic warning indicating that pedestrians may be crossing or entering the roadway ahead. It is commonly used near pedestrian crossings or other locations where drivers need advance notice of frequent pedestrian activity.
Drivers approaching a pedestrian warning should reduce speed when necessary, watch carefully for pedestrians and be prepared to stop. The design of the warning sign and the priority rules at the crossing vary between countries.
Wikimedia.org • Ingolfson • CC0
How should I react to a pedestrian warning in New Zealand?
Reduce speed, look along both sides of the road and be ready to stop. The warning identifies a pedestrian hazard ahead; children, people with limited mobility or others may enter the road unexpectedly.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — pedestrian-warning
Does a pedestrian warning in New Zealand identify the crossing itself?
Not necessarily. An advance warning alerts you to danger ahead. The actual crossing is identified by its own signs, markings or signals. Apply the crossing rules when you reach it, and follow any supplementary distance information.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — pedestrian-warning
Warning for pedestrians.
English • W16-1 • Pedestrians. Pedestrians may be on or crossing the road. Slow down and watch carefully.
Sources
🔗 Commons.wikimedia.org
🔗 Nzta.govt.nz • NZTA sign specifications • W16-1
Image via Commons.wikimedia.org
New Zealand Transport Agency • NZTA-Sign-Spec • Source revision 2024-10-16. Wikimedia original unmodified.
What should drivers know about pedestrian crossings in New Zealand?
At a zebra crossing, give way to pedestrians waiting to cross or already crossing. If a raised traffic island divides the crossing, apply the rule to your half. Never overtake a vehicle stopped at the crossing.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — pedestrian-warning
7. Bridge
A bridge is a structure that carries a road, path or railway over an obstacle such as a river, valley, railway line or another road. A road bridge may carry one or more roadways together with pedestrian or cycling facilities.
Drivers should follow any speed, weight, height, width or vehicle-access restrictions applying to the bridge. Particular care may be necessary on narrow, exposed or movable bridges and when weather conditions such as wind, rain or ice affect the road surface.
Wikimedia.org • Bruce Cran • CC BY
What should I check before crossing a bridge in New Zealand?
Check the applicable weight, axle-load, width and height restrictions before committing to the crossing. Include the load, trailer and roof equipment when relevant. A bridge warning and a vehicle restriction serve different purposes; comply with both.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — bridge
Who goes first on a narrow bridge in New Zealand?
At a New Zealand one-lane bridge, a red-bordered circular sign tells your direction to give way. A large white forward arrow on a blue rectangular sign indicates that opposing traffic must give way to you. Slow down and check the bridge before entering, and wait for traffic already committed to the passage to clear it. A bridge warning alone does not allocate priority.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — bridge
May I stop or park on a bridge in New Zealand?
Follow the bridge’s signs and parking rules and keep a one-lane passage clear. Do not use a bridge as a viewpoint stop if doing so obstructs traffic or creates danger; choose a lawful parking place elsewhere.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — bridge
8. Speed bump
A speed bump is a raised traffic-calming device placed across all or part of a road to make drivers reduce their speed. It is commonly used near homes, schools, crossings, parking areas and other places where low vehicle speeds are important.
Speed bumps vary in shape, height and legal status. Drivers should approach them at a low, controlled speed and follow any warning signs or speed limits that apply.
Wikimedia.org • Schwede66 • CC BY-SA
How should I recognise and approach a speed bump in New Zealand?
NZ Transport Agency guidance treats speed humps and raised platforms as traffic-calming measures. A raised platform may support a crossing, but the crossing’s signs and markings must be identified separately.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — speed-bump
Warning for a speed bump.
English • W14-4 • Hump. A hump in the road is ahead. Slow down before reaching it.
Sources
🔗 Commons.wikimedia.org
🔗 Nzta.govt.nz • NZTA sign specifications • W14-4
Image via Commons.wikimedia.org
New Zealand Transport Agency • NZTA-Sign-Spec • Source revision 2024-09-22. Wikimedia original unmodified.
Which speed should I use at a raised device in New Zealand?
Follow the applicable limit and any advisory information, slowing further when needed for the platform or other road users. A design or advisory speed must not be confused with the road’s legal speed limit.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — speed-bump
Does a raised road surface give pedestrians priority in New Zealand?
A raised device alone does not identify pedestrian priority. If it incorporates a crossing, apply the crossing’s controls and the national rules. At a zebra crossing, give way to pedestrians waiting to cross or already crossing. If a raised traffic island divides the crossing, apply the rule to your half. Never overtake a vehicle stopped at the crossing.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — speed-bump
9. One-way traffic
One-way traffic means that vehicles on a road or carriageway may travel only in one designated direction. The permitted direction is normally indicated by traffic signs, lane arrows or road markings.
Some road users, such as cyclists or public-transport vehicles, may be allowed to travel in the opposite direction when signs expressly permit it. A one-way road does not by itself determine the speed limit, priority or parking rules.
Wikimedia.org • LincolnGroup11 • CC BY-SA
How should I read a one-way restriction in New Zealand?
Follow New Zealand’s one-way signs, entrance restrictions and lane arrows. A separate cycle facility can have its own direction, which must be identified from its signs and markings.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — one-way-traffic
No entry.
English • R3-4 • No entry. Do not enter the road from this direction.
Sources
🔗 Commons.wikimedia.org
🔗 Nzta.govt.nz • NZTA sign specifications • R3-4
Image via Commons.wikimedia.org
New Zealand Transport Agency • NZTA-Sign-Spec • Source revision 2024-12-14. Wikimedia original unmodified.
May cyclists travel against the general traffic direction in New Zealand?
Use a contraflow cycling facility only where the actual road arrangement permits it. A cycle route drawn on a map is not an exemption from one-way or no-entry controls; motorists should look for any authorised cycle lane before turning.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — one-way-traffic
Does one-way traffic give me priority or a different speed limit in New Zealand?
A one-way restriction concerns direction. Continue to follow the applicable speed limit, signals, give-way or stop controls and junction-priority rules. Where authorised counterflow traffic exists, check for it before turning or crossing; your permitted direction is not automatic junction priority.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — one-way-traffic
10. Slope
A slope is a section of road that rises or descends noticeably. A steep slope can affect vehicle speed, braking distance, traction, visibility and the ability of heavy or low-powered vehicles to maintain a steady speed.
Warning signs may indicate a steep ascent or dangerous descent and may show the gradient as a percentage. Drivers should adjust their speed early, select a suitable gear and remain prepared for slow vehicles, bends and changing road conditions.
Wikimedia.org • Michal Klajban • CC BY-SA
What does a steep-slope warning mean in New Zealand?
New Zealand’s Road Code warns about steep hills and recommends a suitable gear for a descent. Reduce speed before the slope so that braking and engine braking can keep the vehicle controlled.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — slope
Warning for a steep ascent.
English • W14-10.1 • Steep ascent. A steep uphill section is ahead. Select a suitable gear and allow for slower vehicles.
Sources
🔗 Commons.wikimedia.org
🔗 Nzta.govt.nz • NZTA sign specifications • W14-10.1
Image via Commons.wikimedia.org
New Zealand Transport Agency • NZTA-Sign-Spec • Source revision 2021-03-22. Wikimedia original unmodified.
Warning for a steep descent.
English • W14-9.1 • Steep descent. A steep downhill section is ahead. Select a suitable gear and control your speed.
Sources
🔗 Commons.wikimedia.org
🔗 Nzta.govt.nz • NZTA sign specifications • W14-9.1
Image via Commons.wikimedia.org
New Zealand Transport Agency • NZTA-Sign-Spec • Source revision 2021-03-22. Wikimedia original unmodified.
How should I approach a steep descent in New Zealand?
Reduce speed before the descent and select a suitable gear to help control the vehicle. Keep enough following distance and avoid building up speed that requires continuous heavy braking. A warning gives no fixed safe descent speed: the gradient, surface, visibility, load and vehicle can require a speed well below the legal maximum.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — slope
What should I check when meeting or overtaking on a slope in New Zealand?
Do not overtake if you cannot see enough clear road ahead. On a narrow section, follow any give-way or priority signs and use a suitable passing place rather than assuming the gradient warning decides priority.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — slope
11. Bus lane
A bus lane is a traffic lane reserved primarily for buses or other authorised public-transport vehicles. It is intended to improve the reliability and flow of public transport by allowing authorised vehicles to avoid general traffic congestion.
Other road users, such as taxis, cyclists, motorcycles or vehicles carrying several occupants, may also be permitted when signs expressly allow them. The operating hours, permitted vehicles, direction of travel and rules for entering or crossing the lane depend on local traffic signs and regulations.
Wikimedia.org • LincolnGroup11 • CC BY-SA
Which vehicles may use a bus lane in New Zealand?
New Zealand distinguishes a bus lane from a bus-only lane. Read the lane’s signs, markings, permitted users and any stated operating period.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — bus-lane
🔗 nzta.govt.nz • NZTA — bus-lane and bus-only-lane legal definitions
🔗 nzta.govt.nz • NZTA — special-lane access minimum necessary distance, maximum50m
Lane for buses.
English • R4-7 • Bus lane. This marks a bus lane. Cycles, mopeds and motorcycles may also use it unless signs or markings exclude them; observe any operating times.
Sources
🔗 Commons.wikimedia.org
🔗 Nzta.govt.nz • NZTA sign specifications • R4-7
🔗 Nzta.govt.nz • NZTA design guidance • bus lanes
Image via Commons.wikimedia.org
New Zealand Transport Agency • NZTA-Sign-Spec • Source revision 2020-04-29. Wikimedia original unmodified.
May bicycles and motorcycles use a bus lane in New Zealand?
In New Zealand, an ordinary bus lane can be used by cycles, mopeds and motorcycles unless the signs or markings specifically exclude them. A bus-only lane is reserved for buses. Read the exact lane designation and operating conditions; permission to use an ordinary bus lane does not authorise entry to a bus-only lane.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — bus-lane
🔗 nzta.govt.nz • NZTA — bus-lane and bus-only-lane legal definitions
🔗 nzta.govt.nz • NZTA — special-lane access minimum necessary distance, maximum50m
Does bus-lane access also allow stopping or parking in New Zealand?
The Road Code permits necessary use of a special-vehicle lane for specified access or turning purposes for no more than 50 metres, subject to its conditions. That permission is not a general right to travel in or park in the lane.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — bus-lane
🔗 nzta.govt.nz • NZTA — bus-lane and bus-only-lane legal definitions
🔗 nzta.govt.nz • NZTA — special-lane access minimum necessary distance, maximum50m
12. Stop sign
A stop sign requires drivers to bring their vehicle to a complete stop and give way before entering or crossing the road ahead. The stop must be made at the stop line or another legally prescribed position.
After stopping, the driver may continue only when this can be done safely and without interfering with traffic that has priority. The sign does not create priority for the driver who has stopped.
Wikimedia.org • LincolnGroup11 • CC BY-SA
Must I stop completely at a stop sign in New Zealand?
Yes. Come to a complete stop when the applicable stop sign controls your approach, even when you cannot see another road user. Slowing to a crawl is not a stop. The stopping duty is separate from the duty to give way before continuing.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — stop-sign
Stop and give way.
English • R2-1 • Stop. Stop completely, then give way to traffic with priority before proceeding.
Sources
🔗 Commons.wikimedia.org
🔗 Nzta.govt.nz • NZTA sign specifications • R2-1
Image via Commons.wikimedia.org
New Zealand Transport Agency • NZTA-Sign-Spec • Source revision 2025-01-13. Wikimedia original unmodified.
Where must I stop at a stop-controlled junction in New Zealand?
Stop before the limit line. Without a limit line, stop where you can see traffic on the road you are joining, while remaining clear of its traffic and complying with the Road Code.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — stop-sign
Does stopping first give me priority at a stop sign in New Zealand?
A complete stop does not, by itself, give you priority. Give way to the road users entitled to pass under the junction’s signs and rules, check pedestrians and cyclists, and proceed only when the gap is safe. Do not follow another stopped vehicle through without satisfying your own stopping and yielding duties.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — stop-sign
13. Give way
A give-way sign requires drivers to allow traffic with priority to proceed before entering, crossing or joining a road. Drivers must reduce speed, observe approaching traffic and stop when necessary.
Unlike a stop sign, a give-way sign does not always require a complete stop. The driver may continue without stopping only when the route is clearly safe and no road user with priority is forced to change speed or direction.
Wikimedia.org • Phillip Capper • CC BY
What does giving way mean in New Zealand?
New Zealand uses Give Way signs and markings. Slow down, be ready to stop and apply the give-way rules to the vehicles whose paths conflict with yours.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — give-way
Give way.
English • R2-2 • Give way. Slow down and give way to traffic with priority; stop if necessary.
Sources
🔗 Commons.wikimedia.org
🔗 Nzta.govt.nz • NZTA sign specifications • R2-2
Image via Commons.wikimedia.org
New Zealand Transport Agency • NZTA-Sign-Spec • Source revision 2020-05-07. Wikimedia original unmodified.
Must you always stop when giving way in New Zealand?
No. A give-way control requires stopping when necessary to yield or obtain a safe view. A stop sign requires a complete stop even if the road appears empty.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — give-way
What should you check before proceeding after giving way in New Zealand?
Wait until the manoeuvre is safe. Check the priority traffic, the view in both directions and enough space to complete the entry. Giving way to one vehicle does not remove duties towards another driver, a cyclist or a pedestrian.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — give-way
14. Roundabout
A roundabout is a circular road arrangement in which traffic travels around a central island in one designated direction. Vehicles enter and leave through connecting roads, and traffic signs or local rules determine who has priority.
Drivers should reduce speed, choose a suitable lane, observe all road users and signal as required when leaving. The direction of travel, entry priority, lane use and rules for cyclists and pedestrians depend on local traffic signs and regulations.
Wikimedia.org • Ingolfson • CC0
Who has priority at a roundabout in New Zealand?
New Zealand’s Road Code requires yielding to vehicles that will cross your path from the right as you enter the roundabout. Follow the signs, markings and any signals, and do not enter until the gap is safe.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — roundabout
Warning for a roundabout.
English • W11-1 • Roundabout ahead. A roundabout is ahead. Reduce speed and prepare for its give-way control.
Sources
🔗 Commons.wikimedia.org
🔗 Nzta.govt.nz • NZTA sign specifications • W11-1
Image via Commons.wikimedia.org
New Zealand Transport Agency • NZTA-Sign-Spec • Source revision 2021-02-03. Wikimedia original unmodified.
How should you choose a roundabout lane in New Zealand?
Choose your intended exit before entering and follow the lane arrows and destination signs. Keep to the marked route and make any permitted lane change only when safe; having priority over entering traffic does not give you priority to change lanes.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — roundabout
What should you check when leaving a roundabout in New Zealand?
Signal left for a left exit, do not signal on approach for straight ahead, and signal right for an exit more than halfway around. Signal left after passing the exit before yours, if practicable. Follow the lane arrows and check other road users.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — roundabout
15. Road narrowing
A road narrowing is a section where the available width of the road or carriageway becomes smaller. The narrowing may occur on both sides, on one side only, or because one or more traffic lanes end.
Drivers should reduce speed, observe approaching and adjacent traffic, maintain sufficient lateral clearance and merge when necessary. Warning signs do not always determine priority, so drivers must follow any priority signs, lane markings and local traffic rules.
Wikimedia.org • itravelNZ • CC BY
What does a road-narrowing warning mean in New Zealand?
New Zealand warns of narrow roads and bridges separately from the signs that allocate priority at one-lane bridges. Assess the available width and read the full arrangement before entering.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — road-narrowing
Warning for a road narrowing.
English • W13-1.1 • Road narrows on both sides. The road becomes narrower on both sides. Adjust speed and position for the reduced width.
Sources
🔗 Commons.wikimedia.org
🔗 Nzta.govt.nz • NZTA sign specifications • W13-1.1
Image via Commons.wikimedia.org
New Zealand Transport Agency • NZTA-Sign-Spec • Source revision 2021-02-05. Wikimedia original unmodified.
Warning for a road narrowing on the left.
English • W13-1 • Road narrows on the left. The road becomes narrower on the left. Watch for vehicles changing position.
Sources
🔗 Commons.wikimedia.org
🔗 Nzta.govt.nz • NZTA sign specifications • W13-1
Image via Commons.wikimedia.org
New Zealand Transport Agency • NZTA-Sign-Spec • Source revision 2021-02-05. Wikimedia original unmodified.
Does a narrowing warning give you priority in New Zealand?
No. A warning describes the reduced width, rather than allocating priority or setting a numerical speed limit. Follow any separate priority signs, signals and meeting rules, and slow enough to pass safely or wait before entering.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — road-narrowing
What should you do if traffic lanes merge at a narrowing in New Zealand?
New Zealand’s Road Code advises merging like a zip when traffic lanes merge: adjust speed and alternate with vehicles in the other lane. Check the markings and do not force a manoeuvre when the gap is unsafe.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — road-narrowing
16. Pedestrian crossing
A pedestrian crossing is a designated place where pedestrians may cross a road. It is commonly indicated by road markings, traffic signs, signals or a combination of these measures.
Drivers must approach with appropriate caution and give way when required by local law. Pedestrians must also observe approaching traffic and follow any pedestrian signals or instructions from authorised traffic controllers.
Wikimedia.org • Krzysztof Golik • CC BY-SA
When must drivers give way at a pedestrian crossing in New Zealand?
At a New Zealand zebra crossing, give way to people on the crossing or waiting to cross. When a raised traffic island separates its halves, the give-way duty is assessed for the relevant half.
🔗 legislation.govt.nz • New Zealand, Land Transport (Road User) Rule 2004, clause 10.1
Are all pedestrian crossings controlled the same way in New Zealand?
A kea crossing is a school patrol crossing activated by a STOP sign. A courtesy crossing is not necessarily a legally marked zebra crossing; drivers must distinguish them.
🔗 nzta.govt.nz • NZ Transport Agency, zebra, kea and courtesy crossings
Warning for a pedestrian crossing.
English • W16-2 • Pedestrian crossing ahead. A pedestrian crossing is ahead. Reduce speed and prepare to give way as required at the crossing.
Sources
🔗 Commons.wikimedia.org
🔗 Nzta.govt.nz • NZTA sign specifications • W16-2
Image via Commons.wikimedia.org
New Zealand Transport Agency • NZTA-Sign-Spec • Source revision 2024-11-08. Wikimedia original unmodified.
May I enter a pedestrian crossing if the road beyond it is blocked in New Zealand?
Wait before the crossing if stationary traffic would block your passage through it. Do not pass a vehicle stopped or slowing for people on a pedestrian crossing. Keep pedestrian passage clear and check for people hidden by other vehicles.
🔗 legislation.govt.nz • New Zealand, Land Transport (Road User) Rule 2004, clause 10.1; 🔗 nzta.govt.nz • New Zealand Transport Agency, Road Code, Passing
What should I do if a pedestrian is still crossing when the traffic signal changes in New Zealand?
Allow the pedestrian to finish crossing safely. A green vehicle signal is not permission to drive into someone who is still in the crossing; watch particularly for pedestrians obscured by turning or queued vehicles.
🔗 legislation.govt.nz • New Zealand, Land Transport (Road User) Rule 2004, clause 3.2
Must New Zealand pedestrians use a crossing facility within 20 metres?
Yes. This includes a pedestrian crossing, footbridge, underpass or traffic signal.
🔗 nzta.govt.nz • New Zealand, NZTA General Road Code, general pedestrian guidelines
What does New Zealand’s Road Code advise when crossing between parked vehicles?
Move out as far as the headlight of the parked car nearest traffic, check for moving vehicles and wait for a gap.
🔗 nzta.govt.nz • New Zealand, NZTA General Road Code, general pedestrian guidelines
When may New Zealand drivers proceed after a school patrol extends its Stop signs?
Vehicles from both directions must remain stopped until all the signs are withdrawn.
Is New Zealand’s white diamond approach marking compulsory at every zebra crossing?
No. NZTA’s Traffic Note 1 gives the road controlling authority discretion over the white diamond, which is specified at least 50 metres before the crossing.
17. Railway crossing
A railway crossing, also called a level crossing or railroad crossing, is a place where a road or path crosses railway tracks at the same level. It may be protected by barriers, warning lights, bells, traffic signs or a combination of these measures.
Road users must approach carefully and never enter when a train is approaching, warning signals are active or the exit is blocked. They should cross promptly and must never stop, wait or become trapped on the tracks.
Wikimedia.org • Reinhard Dietrich • CC0
When must I stop at a railway level crossing in New Zealand?
Stop for a STOP sign and when warning lights flash, bells ring or a barrier begins to lower. At a GIVE WAY crossing, slow down, check both directions and stop for approaching rail traffic. Certain passenger-service vehicles and vehicles carrying specified dangerous goods have additional stopping duties at crossings without active protection.
🔗 nzta.govt.nz • New Zealand Transport Agency, Heavy vehicle Road Code, railway level crossings
Warning for a railway crossing with barriers.
English • W15-6 • Railway flashing signals ahead. A railway crossing with flashing light signals is ahead. Be prepared to stop when the signals operate.
Sources
🔗 Commons.wikimedia.org
🔗 Nzta.govt.nz • NZTA sign specifications • W15-6
Image via Commons.wikimedia.org
New Zealand Transport Agency • NZTA-Sign-Spec • Source revision 2021-01-23. Wikimedia original unmodified.
Warning for a railway crossing without barriers.
English • W15-5 • Railway level crossing ahead. A railway level crossing is ahead. Slow down, check for trains and obey the crossing controls.
Sources
🔗 Commons.wikimedia.org
🔗 Nzta.govt.nz • NZTA sign specifications • W15-5
Image via Commons.wikimedia.org
New Zealand Transport Agency • NZTA-Sign-Spec • Source revision 2024-11-25. Wikimedia original unmodified.
Warning for a railway crossing with one track.
English • W15-3.1 • Railway crossing crossbuck. This marks a railway level crossing. Check for trains and obey any separate stop, give-way, light or barrier controls.
Sources
🔗 Commons.wikimedia.org
🔗 Nzta.govt.nz • NZTA sign specifications • W15-3.1
Image via Commons.wikimedia.org
New Zealand Transport Agency • Public domain • Source revision 2012-10-08. Wikimedia original unmodified.
Warning for a railway crossing with two or more tracks.
English • W15-3 family • Railway crossbuck with track plate. This marks a railway crossing with a plate identifying the number of tracks. Check every track and obey the crossing controls; the illustrated plate does not display a readable track count. Illustration identified by its sign family or meaning; the exact current prescribed design has not been confirmed.
Sources
🔗 Commons.wikimedia.org
🔗 Nzta.govt.nz • NZTA sign specifications • W15-3.1
SVG source: New Zealand Transport Agency • Public domain • Original revision 2012-11-09. Wikimedia original unmodified.
Must I stop at every unguarded railway crossing in New Zealand?
Not every ordinary car must stop merely because a crossing has no barriers. A STOP sign requires a full stop; at a GIVE WAY crossing, slow down, check for trains and stop when necessary to give way. Certain passenger-service vehicles and vehicles carrying specified dangerous goods have additional stopping duties even at uncontrolled or GIVE WAY crossings.
🔗 nzta.govt.nz • New Zealand Transport Agency, Heavy vehicle Road Code, railway level crossings
What if road traffic is queued beyond a railway crossing in New Zealand?
Wait before the tracks until there is room to take your entire vehicle off the crossing. Do not follow another vehicle onto the tracks without checking the exit. Keep the tracks clear even if no train is visible.
🔗 legislation.govt.nz • New Zealand, Land Transport (Road User) Rule 2004, clause 9.3
Can I cross after a train has passed if the warning lights are still active in New Zealand?
No. Remain behind the stopping position until the crossing signals permit travel and barriers are fully clear. Another train may be approaching on a different track.
🔗 nzta.govt.nz • New Zealand Transport Agency, Giving way at railway level crossings
18. Mandatory direction
A mandatory-direction sign requires drivers to travel only in the direction or one of the directions indicated by its arrow or arrows. It may require traffic to continue straight ahead, turn, or pass an obstacle on a specified side.
The sign does not itself determine priority or speed. Drivers must still use the appropriate lane, signal when required and give way according to local traffic signs and regulations.
Wikimedia.org • Krzysztof Golik • CC BY-SA
How can a mandatory turn be indicated in New Zealand?
Mandatory movements in New Zealand may be shown by regulatory signs, lane-direction arrows or turn-only indications. Do not expect the sign shape to be identical to the European blue circular sign system.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — mandatory-direction
Can I choose another turn if the mandatory-direction arrow is inconvenient in New Zealand?
No, unless another applicable sign, lane instruction or authorised traffic direction lawfully permits it. Plan a permitted alternative route; do not make an abrupt or prohibited turn to reach your destination.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — mandatory-direction
Does a mandatory-direction sign give me priority over pedestrians in New Zealand?
No. It tells you which way to move, not who goes first. Check traffic lights, other priority signs, pedestrians and cyclists, and give way when required before completing the manoeuvre.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — mandatory-direction
19. Turn prohibition
A turn prohibition prevents drivers from turning in the direction indicated by a traffic sign. It may prohibit a left turn, a right turn or a U-turn at an intersection or along a specified section of road.
Drivers must continue along a permitted route and follow any lane arrows or mandatory-direction signs. A turn prohibition does not itself determine priority or speed, and any exemption for cyclists, public transport or other road users must be expressly indicated.
Wikimedia.org • Mattinbgn • CC BY
What does a no-turn sign prohibit in New Zealand?
It prohibits the left, right or other turn shown at the junction or position controlled by the sign in New Zealand. Follow any supplementary panel or authorised direction and choose another legal route.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — turn-prohibition
Can a no-turn restriction apply only to certain vehicles or hours in New Zealand?
Yes, where the local sign system provides a supplementary condition or exemption, such as a vehicle class, time or authorised access. Without a valid exception, comply with the prohibited movement shown.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — turn-prohibition
20. School area
A school area is a road or group of roads near a school where large numbers of children may walk, cycle, cross the road or enter and leave vehicles. It may be identified by warning signs, zone signs, road markings, traffic-calming measures or flashing lights.
Special speed limits, parking restrictions or access rules may apply permanently or only during school arrival and departure times. Drivers should reduce speed, watch carefully for children and be prepared to stop.
Wikimedia.org • Eleanor Bloomfield • CC0
What speed rules apply around schools in New Zealand?
New Zealand school approaches may have permanent or variable speed limits; check the regulatory signs, their operating periods and any local restrictions.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — school-area
Warning for children.
English • W16-4 • Children. Children may be near or crossing the road. Slow down and be prepared to stop.
Sources
🔗 Commons.wikimedia.org
🔗 Nzta.govt.nz • NZTA sign specifications • W16-4
Image via Commons.wikimedia.org
New Zealand Transport Agency • NZTA-Sign-Spec • Source revision 2024-10-19. Wikimedia original unmodified.
Does a school warning sign in New Zealand automatically set the speed limit?
A children or school warning alerts you to a potential hazard; the enforceable numerical speed limit depends on the applicable law, regulatory signs and any time or variable display. Slow further if children are near the road.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — school-area
How should you pass a school entrance in New Zealand?
Watch for children stepping out from between parked vehicles, obey crossings and any school patrol, and follow stopping or parking restrictions. Do not obstruct visibility near a crossing or school entrance; approach at a speed that permits a safe stop.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — school-area
21. Crossing animals
An animals-crossing warning indicates a place or road section where wild animals, livestock or ridden animals may enter or cross the road. Animals may appear suddenly, move unpredictably or be difficult to see in darkness, vegetation or poor weather.
Drivers should reduce speed, scan both sides of the road and remain prepared to stop. The warning sign does not itself give animals priority or impose a numerical speed limit, but drivers must avoid frightening, endangering or colliding with them.
Wikimedia.org • AlasdairW • CC BY-SA
Which animals might drivers encounter on roads in New Zealand?
Depending on the locality, drivers may meet sheep, cattle, deer and other animals on rural roads. Roadside animal-warning signs and local hazard information indicate where extra care may be needed; do not assume the hazard ends immediately after a sign.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — crossing-animals
Warning for cattle on the road.
English • W18-3.1 • Cattle. Cattle may be on or crossing the road. Slow down and pass animals cautiously.
Sources
🔗 Commons.wikimedia.org
🔗 Nzta.govt.nz • NZTA sign specifications • W18-3.1
Image via Commons.wikimedia.org
New Zealand Transport Agency • NZTA-Sign-Spec • Source revision 2021-04-28. Wikimedia original unmodified.
Does an animal-crossing warning sign in New Zealand set a new speed limit?
A warning of animals is not, by itself, a numerical speed-limit sign. Continue to obey the applicable speed limit, but slow down whenever animals could enter the road or visibility is poor. A separate regulatory speed sign must also be obeyed.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — crossing-animals
What should you do if an animal enters the road in New Zealand?
Ease off the accelerator, assess the traffic behind and brake smoothly if necessary. Avoid abrupt swerving into opposing traffic or off the road. Give farm animals and ridden animals room, avoid frightening them with unnecessary horn use, and be alert for more animals following.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — crossing-animals
22. Slippery road
A slippery road has reduced tyre grip and can make steering, braking and acceleration less effective. Roads may become slippery because of rain, ice, snow, mud, oil, loose material or other substances on the surface. Drivers should reduce speed, increase their following distance and avoid sudden steering, braking or acceleration. Extra caution is needed in bends, on bridges and wherever the road surface changes unexpectedly.
Wikimedia.org • Karora • CC0
What can make roads slippery in New Zealand?
Be prepared for heavy rain, gravel, frost and ice on alpine roads. A surface can become slippery even if it looks clear, and different parts of the road may have very different grip.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — slippery-road
How should you drive on a slippery road in New Zealand?
Reduce speed early, increase the gap to the vehicle ahead and use smooth steering, braking and acceleration. Do not rely on the posted maximum as a safe target when grip is poor.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — slippery-road
Does a slippery-road warning sign in New Zealand automatically impose a lower number?
The warning sign highlights a reduced-grip risk; it normally does not itself prescribe a new numerical speed limit. A separate speed-limit sign, temporary restriction or local condition may still apply. Travel below the legal maximum when necessary for safety.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — slippery-road
Warning for a slippery road surface.
English • W14-7 • Slippery surface. The road surface may be slippery. Reduce speed and avoid sudden braking or steering.
Sources
🔗 Commons.wikimedia.org
🔗 Nzta.govt.nz • NZTA sign specifications • W14-7
Image via Commons.wikimedia.org
New Zealand Transport Agency • NZTA-Sign-Spec • Source revision 2021-02-03. Wikimedia original unmodified.
23. Curve
A curve is a section of road that changes direction to the left or right. A sharp, unexpected or poorly visible curve can reduce a driver’s view of approaching traffic, stopped vehicles, pedestrians and other hazards.
Drivers should reduce speed before entering the curve, remain within their lane and use smooth steering, braking and acceleration. Warning signs may indicate the direction of the first curve or a series of successive curves.
Wikimedia.org • Krzysztof Golik • CC BY-SA
What makes a bend dangerous in New Zealand?
Curves shorten your view of the road ahead and can reduce the margin for correcting a mistake. Drivers may encounter narrow, hilly roads with winding bends and occasional one-lane bridges; the safe speed can be well below the posted maximum. A separate advisory-speed plate can give useful guidance for a curve, but it does not replace a posted legal maximum.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — curve
How should you approach a sharp curve in New Zealand?
Slow down before the bend, select the correct lane position, look through the curve and steer smoothly. Keep enough grip and visible stopping distance for the road and weather conditions.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — curve
Is overtaking safe on a blind bend in New Zealand?
No. Do not start overtaking where your view of oncoming traffic is obstructed or where signs or road markings prohibit it. Wait until there is a lawful, clear and sufficiently long view ahead.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — curve
Warning for a curve to the left.
English • W12-1.2 • Curve left. The road curves to the left ahead. Adjust speed to the curve and conditions.
Sources
🔗 Commons.wikimedia.org
🔗 Nzta.govt.nz • NZTA sign specifications • W12-1.2
Image via Commons.wikimedia.org
New Zealand Transport Agency • NZTA-Sign-Spec • Source revision 2021-03-06. Wikimedia original unmodified.
24. Chevron
A chevron is a V-shaped or arrow-shaped road marker used to show a sharp change in the direction of a road. Chevron boards are normally placed along the outside of a curve so that their points indicate the direction in which the road continues.
Chevrons improve the visibility and alignment of a curve, especially in darkness or poor weather. They do not normally impose a speed limit or determine priority, so drivers must reduce speed before the curve and follow all other signs and road markings.
Wikimedia.org • Krzysztof Golik • CC BY-SA
What is the purpose of chevron boards on a road in New Zealand?
Chevron alignment boards help drivers see which way a sharp bend continues, especially in darkness or poor visibility. A chevron or curve sign may have a separate advisory-speed number; distinguish that advice from an enforceable speed-limit sign.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — chevron
Do chevron boards give priority or order a turn at junctions in New Zealand?
Not ordinary curve-alignment chevrons. They guide you around a bend. Give-way, no-entry, keep-direction and other mandatory traffic signs must be read separately; similar-looking arrows can have different legal meanings.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — chevron
Is the speed shown by a chevron in New Zealand a compulsory maximum?
A chevron alone does not set a numerical maximum speed. If an advisory-speed panel or a regulatory speed-limit sign is displayed alongside it, identify which type it is and follow the binding speed rules.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — chevron
25. Wrong-way driving
Wrong-way driving occurs when a driver travels against the legally permitted direction of traffic. It may happen on a one-way road, divided road, motorway entrance or exit, or another road section reserved for traffic travelling in one direction.
Wrong-way driving creates an extreme risk of a head-on collision. Drivers must follow direction signs, no-entry signs, lane arrows and road markings. Anyone who accidentally enters a road in the wrong direction should slow down, warn other traffic, stop in the safest available place and contact the emergency services.
Wikimedia.org • LincolnGroup11 • CC BY
How can you avoid driving the wrong way in New Zealand?
Traffic normally keeps left here. Keep to the correct side of the road and use no-entry and one-way signs to identify prohibited approaches; do not enter an exit ramp against its permitted direction.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — wrong-way-driving
What signs can prevent wrong-way driving in New Zealand?
Watch for no-entry and one-way signs at divided-road entrances. Before entering a motorway, expressway, one-way street or slip road, check the permitted direction rather than relying only on a navigation app.
🔗 nzta.govt.nz • New Zealand, NZTA official Road Code — wrong-way-driving